From: Majonestx (majonestx@gmail.com)
Date: Mon Aug 11 2008 - 19:30:09 ART
Joe you've been on fire for quite sometime!!!
Sent from my iPhone
On Aug 11, 2008, at 4:30 PM, Hobbs <deadheadblues@gmail.com> wrote:
> Thanks Joe, it worked perfectly. I just enabled it on R2 to get it
> to fail
> and it did pretty quick. looks like I'm gonna have to research frame-
> relay
> multi-point subinterfaces some more.
>
>
> On Mon, Aug 11, 2008 at 2:58 PM, Joseph Brunner <joe@affirmedsystems.com
> >wrote:
>
>> From what I understand of mulitpoint interfaces, is that if I shut
>> R5 and
>> R6
>> main interfaces down, then R2 will put it's multipoint subinterface
>> in
>> down/down state. Is that correct?
>>
>>> not with out frame-relay EEK IMHO. You can apply those in a frame-
>>> relay
>> map-class
>>
>> -Joe
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> Behalf Of
>> Hobbs
>> Sent: Monday, August 11, 2008 4:52 PM
>> To: ccielab@groupstudy.com
>> Subject: backup interface configuration: primary frame-relay
>> multipoint
>> subinterface not going down when remote side is shut
>>
>> I have R2, R5 and R6 in a frame-relay mesh config.
>>
>> R2 has a multipoint subinterface to the cloud, R5 and R6 have
>> physical
>> interfaces.
>> Inverse-arp is disabled.
>> R2 has a backup interface to R5 via s0/2/0.
>>
>> From what I understand of mulitpoint interfaces, is that if I shut
>> R5 and
>> R6
>> main interfaces down, then R2 will put it's multipoint subinterface
>> in
>> down/down state. Is that correct?
>>
>> I even removed frame-maps and ip address off of R2, but the primary
>> interface is still up/up:
>>
>> R2(config-subif)#do show ip int brief
>> Serial0/1/0.256 unassigned YES unset up
>> up
>> Serial0/2/0 150.100.25.2 YES NVRAM standby mode
>> down
>>
>> R5(config-if)#do show ip int brief | inc 0/1/0
>> Serial0/1/0 150.100.100.5 YES manual
>> administratively
>> down
>> down
>>
>> R6(config-if)#do show ip int brief | inc 0/1/0
>> Serial0/1/0 150.100.100.6 YES manual
>> administratively
>> down
>> down
>>
>> Is there something else I am missing?
>>
>> Thanks,
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART