From: Scott Morris (swm@emanon.com)
Date: Mon Aug 11 2008 - 11:28:29 ART
Heheheh... No worries. Cheese always goes with a good whine. :)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Sent: Monday, August 11, 2008 10:25 AM
To: smorris@internetworkexpert.com; 'Fahad Khan'; 'Scott Strobeck'
Cc: CCIElab@groupstudy.com
Subject: Re: Getting rid of frame maps
Inanimate objects can't be stupid or smart. I realize this, and am just
whining. Send cheese soonest
----- Original Message -----
From: "Scott Morris" <smorris@internetworkexpert.com>
To: "'John'" <jgarrison1@austin.rr.com>; "'Fahad Khan'"
<fahad.khan@gmail.com>; "'Scott Strobeck'" <scott@strobeck.net>
Cc: <CCIElab@groupstudy.com>
Sent: Monday, August 11, 2008 5:24 AM
Subject: RE: Getting rid of frame maps
> That doesn't make frame stupid... It just makes the IOS load that you
> have a little irritating. ;)
>
> Not everything in life works as planned all the time!
>
> But understanding those variants and dealing with them makes for a
> much more successful lab attempt!
>
> HTH,
>
>
> Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> Senior CCIE Instructor
>
> smorris@internetworkexpert.com
>
>
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Outside US: 775-826-4344
>
> Knowledge is power.
> Power corrupts.
> Study hard and be Eeeeviiiil......
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of John
> Sent: Sunday, August 10, 2008 10:52 PM
> To: Fahad Khan; Scott Strobeck
> Cc: CCIElab@groupstudy.com
> Subject: Re: Getting rid of frame maps
>
> No sir I don't like it, not one bit. Frame is stupid, because it
> doesn't behave like I want it too. I always clear inarp, and
> sometimes I reload, although I have no exact rule as to when I reload
> and I when I don't. Shut no shut doesn't always do the trick
> ----- Original Message -----
> From: Fahad Khan
> To: Scott Strobeck
> Cc: John ; CCIElab@groupstudy.com
> Sent: Sunday, August 10, 2008 11:58 AM
> Subject: Re: Getting rid of frame maps
>
>
> Yes, "no frame inverse-arp" disables the inverse-arp request but not
> the reply. I think there is no way to block reply. Thats why by
> enabling inverse-arp just at one end you get the mappings on the other
end.
>
>
> On 8/10/08, Scott Strobeck <scott@strobeck.net> wrote:
> John,
>
> "no frame-relay inverse-arp" keeps the interface from sending arp
> requests out. It doesn't, however, keep the router from creating
> dynamic mappings based on incoming arp requests. (Or at least it maps
> based on somthing, . .
> I assume it's incoming arp requests.)
>
> Anyway, try disabling inverse arp on only one side of a FR link and
> clear the inarp, then bounce the opposite end and watch the map
> reappear on the side with inarp disabled. . . .
>
> I got bit by this on a mock lab and it makes a very good point. IF
> IN YOUR LAB YOU ARE USING DYNAMIC MAPPINGS, DISABLE INVERSE ARP ON ALL
> OTHER DLCI'S. If you don't, you may end up with dynamic mappings
> elsewhere in your lab you didn't even expect. After setting up all
> your frame relay in your lab, I STRONGLY suggest issuing "show
> frame-relay map" on EVERY router running FR to make sure you don't
> have unwanted dynamic mappings. YOU WILL LOSE POINT FOR THIS!
>
> Scott
>
>
>
>
> John wrote:
>
> Maybe someone can explain this to me. I enterd the no frame
> inverse commands
> and reloaded the router. When I do a show frame map it appears
> that I have
> gotten rid of the unwanted dynamic mappings. When I do a sh
> frame pvc
> | inc
> dlci. I see dlci's that should not be there because of the no
> frame inv
> commands. Why is this???
>
>
> interface Serial0/0/0
> ip address 54.4.2.6 255.255.255.0
> encapsulation frame-relay
> no frame-relay inverse-arp IP 61
> no frame-relay inverse-arp IP 63
> no frame-relay inverse-arp IP 601
> no frame-relay inverse-arp IP 604
> no frame-relay inverse-arp IP 605
> no frame-relay inverse-arp IP 621
> no frame-relay inverse-arp IP 624
> no frame-relay inverse-arp IP 625
> end
>
> R6(config-router)#DO SH FRAME MAP
> Serial0/0/0 (up): ip 54.4.2.254 dlci 62(0x3E,0xCE0), dynamic,
> broadcast,, status defined, active
> R6(config-router)#DO SH FRAME PVC | INC DLCI
> DLCI = 61, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 62, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 63, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 64, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 65, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 66, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 601, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 602, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 603, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 604, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 605, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 607, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 608, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 609, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 613, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 621, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 622, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 623, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 624, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 625, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 627, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 628, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 629, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0/0
> DLCI = 633, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0/0
> R6(config-router)#
>
>
> Blogs and organic groups at http://www.ccie.net
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
>
>
> --
> FAHAD KHAN
>
> BE Computer Systems NED,
>
> CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE (Written)
>
> Systems Support Engineer, Premier Systems (Pvt) limited,
>
> Karachi, Pakistan
>
> 92-321-2370510.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART