From: Anant Tamgole (anant.tamgole@gmail.com)
Date: Fri Aug 08 2008 - 20:48:38 ART
Also, I have RP mappings in both spokes (without auto-listener commnad on
R1).
Anant
On Sat, Aug 9, 2008 at 5:12 AM, Anant Tamgole <anant.tamgole@gmail.com>wrote:
> No.
> R1,2 and 3 are in area 0.
> On R1, the OIL NULL message comes when we we do debug ip mpacket and other
> drops count increases in sh ip mroute count.
>
> Anant
>
>
> On Fri, Aug 8, 2008 at 10:14 PM, Igor Manassypov <imanassypov@rogers.com
> > wrote:
>
>> Are there any other routers involved in ospf? You might be getting some
>> route feedback which violates your rpf check
>>
>>
>> *Anant Tamgole <anant.tamgole@gmail.com>* wrote:
>>
>> Hi,
>>
>> I have a scenario where
>> 1. R1 is hub and R2,R3 spokes.
>> 2. OSPF is running on main interfaces as NBMA mode.
>> 3. AutoRP is running on Hub R1.
>> 4. igmp join for 224.1.1.1 is on R3's ethernet.
>>
>> Problem: Not able to ping 224.1.1 from R1. If I give reapeat count 10,
>> first
>> ping succeeds but then it stops,
>> From R1 to R3 ping is ok.
>>
>> I tried with ip pim nbma mode on Hub and ip pim spt-threshold infinity on
>> R3
>> , It does not help.
>>
>>
>>
>> Anant
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Igor M., M.Eng, P.Eng
>> Network Architect
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART