From: Igor Manassypov (imanassypov@rogers.com)
Date: Tue Aug 05 2008 - 16:25:08 ART
Hello,
What is the requirement to enable interleaving on my multilink interface?
Whatever i do, I get 'interleaving disabled'. My serial interfaces have 'frame-relay traffic shaping enabled', the two virtual templates are identical and have the config listed below.
Rack1R3#sh ppp multilink
Multilink1, bundle name is Rack1R2
Username is Rack1R2
Endpoint discriminator is Rack1R2
Bundle up for 00:00:03, total bandwidth 56, load 1/255
Receive buffer limit 24000 bytes, frag timeout 1000 ms
Interleaving disabled
0/0 fragments/bytes in reassembly list
0 lost fragments, 8 reordered
0/0 discarded fragments/bytes, 0 lost received
0x14 received sequence, 0x16 sent sequence
Member links: 2 active, 2 inactive (max not set, min not set)
Vi2, since 00:00:03, 35 weight, 42 frag size
Vi1, since 00:00:03, 35 weight, 42 frag size
Vt1 (inactive)
Vt2 (inactive)
No inactive multilink interfaces
interface Virtual-Template1
no ip address
ppp multilink
ppp multilink fragment delay 10
ppp multilink interleave
ppp multilink group 1
end
Thanks!
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART