Re: MPLS in Dynamip

From: Thomas Fowles (tfowles@gmail.com)
Date: Mon Aug 04 2008 - 12:19:27 ART

The IOS Switching services config guide (see link below) has a good table
listing the old tag-switching commands and their newer mpls replacements.

http://www.cisco.com/en/US/docs/ios/12_2/switch/configuration/guide/xcftagov_ps1835_TSD_Products_Configuration_Guide_Chapter.html#wp1026760

HTH

-Thomas Fowles
CCIE No.18762

On Mon, Aug 4, 2008 at 8:34 AM, Shaughn Smith <
Shaughn.Smith@za.verizonbusiness.com> wrote:

> That is not an issue.
>
> Its an old command, the new command is "MPLS IP" on the interface
>
> TDP/LDP will still work either way
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> yungli2008@gmail.com
> Sent: Monday, August 04, 2008 2:08 PM
> To: ccielab@groupstudy.com
> Subject: MPLS in Dynamip
>
> Hi experts
> I am working MPLS in dynamip with IOS c7200-k91p-mz.122-25.S9.bin
> Facing this problme
>
> Rack1R1(config)#mpls label protocol ldp
> Rack1R1(config)#int fastethernet 0/0
> Rack1R1(config-if)#tag-switching ip
> % Command accepted but obsolete, unreleased or unsupported; see
> documentation.
>
> But its working in c3640-jk9o3s-mz.123-14.T7.bin
>
> Can anyone guide me?
>
> advance thanks
> Li
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART