From: Alberto Santos (albertofsantos@gmail.com)
Date: Mon Aug 04 2008 - 09:24:58 ART
Cisco is replacing the old version of mpls and instated of ' tag IP ' you
can use ' mpls ip ' under fastethernet.
Tag switching still available, but as MPLS became a industry standard, you
don't need to use tag commands anymore.
if you for some reason need to test TDP (tag switching) you can just change
the protocol ' mpls label protocol (LDP|TDP|Both)' under any interface.
thx
Alberto
2008/8/4 <yungli2008@gmail.com>
> Hi experts
> I am working MPLS in dynamip with IOS c7200-k91p-mz.122-25.S9.bin
> Facing this problme
>
> Rack1R1(config)#mpls label protocol ldp
> Rack1R1(config)#int fastethernet 0/0
> Rack1R1(config-if)#tag-switching ip
> % Command accepted but obsolete, unreleased or unsupported; see
> documentation.
>
> But its working in c3640-jk9o3s-mz.123-14.T7.bin
>
> Can anyone guide me?
>
> advance thanks
> Li
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Alberto G. Fernandes dos Santos CCIE R&S Written Exam CCIP, CCNP, CCNA ITIL Foundation Cisco ID CSCO10934906 Cel +55 (11)9479-0796 albertofsantos@gmail.com (NEW)Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART