From: dave dave (funccie@gmail.com)
Date: Sat Aug 02 2008 - 23:49:48 ART
oops i forget to mention that i am using dynagen for this lab..does it make
any difference?
Regards
Dave
On 8/3/08, dave dave <funccie@gmail.com> wrote:
>
> Hi Expert,
>
> *net: 200.0.0.0/24*
> --------------------------
> | |
> *R1* ----------------* R2*
> | |
> *R3=========R4* << === it means 2 physical L2 links ether channel as
> e.g. L2 Po1 & Vlan 100 running on R3 as well as R4 to to form ospf
> neighborship over L2 port channel. Vlan 100 in area 0
> | |
> *R5*----------------*R6*
> | |
> -------------------------
> *net: 100.0.0.0/24*
>
> Note :
> this color represting the ospf area 2
> this color represting the ospf area 1
> this color represting the ospf area 0
>
> 1) R1, R2 & including links of R1 & R2 connected to R3 & R4 are on OSPF
> area 1
> 2) R5, R6 & including links of R5 & R6 connected to R3 & R4 are on OSPF
> area 2
> 3) All links are 100 Mbps.
> 4) L2 ether channel of each 100 Mbps links between the R3 & R4 is for vlan
> 100 ospf neighborship
> 5.) when i am traceroute from R6 to R1 for 200.x.x.x it is taking the path
> as follow:
> R6 --> R4 --> R2 --> R1-->200.x.x.x
> i am expecting the path as below , thinking it is the best path to reach
> destination.
> R6 --> R4 --> R3 --> R1-->200.x.x.x
>
> Regards,
> Dave
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART