From: Tyson Scott (tscott@ipexpert.com)
Date: Fri Aug 01 2008 - 15:35:47 ART
There is no difference. It will accept it in different orders but the
command will show up in the config in the same order.
Here:
R1(config-router)#redistribute bgp 10 subnets route-map Loopback
R1(config-router)#do sh run | s router ospf
router ospf 1
log-adjacency-changes
redistribute bgp 10 subnets route-map Loopback
R1(config-router)#no redistribute bgp 10 subnets route-map Loopback
R1(config-router)#red bgp 10 rou
R1(config-router)#red bgp 10 route-map Loopback subn
R1(config-router)#red bgp 10 route-map Loopback subnets
R1(config-router)#do sh run | s router ospf
router ospf 1
log-adjacency-changes
redistribute bgp 10 subnets route-map Loopback
Regards,
Tyson Scott - CCIE #13513 R&S and Security
Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Cell: +1.248.504.7309
Fax: +1.810.454.0130
Mailto: tscott@ipexpert.com
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand
and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE
Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage
Lab Certifications.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ashish .
Sent: Friday, August 01, 2008 2:22 PM
To: ccielab@groupstudy.com; invent.xr@gmail.com
Subject: Redistribution BGP in OSPF
Hi ,
While redistributing BGP in OSPF i'm getting 2 options
I'm doing redist BGP AS10 in OSPF and have a route-map Perm_loopback.
#redistribute bgp 10 subnets route-map Perm_loopback
#redistribure bgp 10 route-map Perm_loopback subnets
can anyone help me understand the diff between these 2 commands....??
Thanks
Ashish
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART