From: Henk de Tombe (henk.de.Tombe@qi.nl)
Date: Fri Aug 01 2008 - 10:00:10 ART
Hi,
This is how I've found it:
Use cisco.com/univercd to start from.
I've chosen the master index from IOS 12.3 and looked at the section for
commands starting from D to E. You can find the following:
Dampening, IP2R-114
You can follow the link to the command reference, or you can use the
IP2R link. If you fly over the link you can see that it links to "ip
route" in the bottom of the browser.
This leads to the ip routing configuration guide where part6 has the
option to read something about protocol independent routing.
Make sure that you can find your way easy through the univercd, this
saves time on the exam!!
Regards,
Henk
Met vriendelijke groet, With kind regards,
Henk de Tombe
senior network engineer
Qi ict
Delftechpark 35-37
Postbus 402, 2600 AK Delft
T : +31 15 888 0 444
F : +31 15 888 0 445
E : mailto:henk.de.Tombe@qi.nl
I : http://www.qi.nl/
-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Ibrahim
kabir
Verzonden: Friday, August 01, 2008 11:25 AM
Aan: ccielab@groupstudy.com
Onderwerp: IP event dampening
Hello guys,
Am looking for a link or a document on IP event Dampening. Explanation
on the feature will also be highly appreciated. Kabir K IbrahimB.sc CCNA
CCNP CCDA CCDP MCP
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART