Routng between 3550 and 2950

From: Raghav Bhargava (raghavbhargava12@gmail.com)
Date: Fri Aug 01 2008 - 01:37:57 ART

HI Experts,

Following is my topology:-

R1(2611) <---> R2(2611) <---->SW1(3550) ======SW2(2950) <----->
R3(2611) <----->R4(2611)

Note:- Link between the SW1 & SW2 is etherchannel

My query is:-

1. Can the routes be received from R1 to R4.If yes then how should be
the Switches configured coz one of them is Layer 2 and the other is
Layer 3

What I have done so far:-

1. I tried configuring SW1 as layer 3 interface and sw2 as layer 2 on
one of the Interface . the link came up but still couln't get routes
from R1 to R4. I did this configuration by deleting the etherchannel
between the 2 switches. I think this is a wrong configuration but I
don't knowhow I should make the packets reachable in this scenario. 

-- 
Warm Regards
Raghav

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:29 ART