Re: Interesting problem (HELP, please)

From: Luca Hall (lhall@setnine.com)
Date: Thu Jul 31 2008 - 23:20:59 ART

can you establish bgp neighbors with ebgp-multihop,
could you be going over more then one hop maybe?

----- Original Message -----
From: Muhammad Nasim <muhammad.nasim@gmail.com>
To: CCIEDAVITO CCIEDAVITO <cciedavito@gmail.com>
Cc: ccielab@groupstudy.com
Sent: Thu, 31 Jul 2008 21:55:14 -0400 (EDT)
Subject: Re: Interesting problem (HELP, please)

Can u please post debug of EIGRP and BGP on both

2008/8/1 CCIEDAVITO CCIEDAVITO <cciedavito@gmail.com>

> Have any of you ran into the following problem?
>
> We have two Cat6500 (Sup720) running IOS Natively
> They are connected across a WAN (essentially, a bridge, with a number of
> players in the middle, handed off as RJ45 at both ends)
>
> Their connected interfaces are addressed with a /30 network, and can ping
> each other (1500 byte packets flow across fine)
>
> With Static routes configured on both ends, end user devices and servers
> can
> talk to devices across the link without an issue
> We cannot establish an EIGRP neighborship across this link
> We cannot establish a BGP neighborship across this link
> If I telnet from one switch, to the other, I get connected, but never get a
> prompt to login, and eventually loose the telnet session.
>
> If any of you have any thoughts about this, I'd be glad to hear them.
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Muhammad Nasim
Network Engineer
Saudi Arabia

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:58 ART