From: Hoogen (hoogen82@gmail.com)
Date: Thu Jul 31 2008 - 01:01:57 ART
2950 switch supports only only L3 interface to be up at any time.
-Hoogen
On Wed, Jul 30, 2008 at 8:58 PM, Raghav Bhargava <raghavbhargava12@gmail.com
> wrote:
> HI Expert,
>
> My query is that When i do a no shut on a specific vlan interface it
> comes up but then immediately it shuts down the other vlan interfaces.
> I am using cisco 2950 switch.
> Following is a small output:-
>
> **************************************************
> (C2950-I6K2L2Q4-M), Version 12.1(22)EA9
>
> SW2(config)#interface vlan 201
> SW2(config-if)#no shu
> SW2(config-if)#no shutdown
> SW2(config-if)#end
> SW2#
> 01:00:21: %SYS-5-CONFIG_I: Configured from console by console
> 01:00:21: %LINK-3-UPDOWN: Interface Vlan201, changed state to up
> 01:00:21: %LINK-5-CHANGED: Interface Vlan100, changed state to
> administratively down
> 01:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan201,
> changed state to up
> 01:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100,
> changed state to down
>
> *************************************************************************
> Please advise..
> --
> Warm Regards
> Raghav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:58 ART