From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jul 28 2008 - 03:29:29 ART
Dave,
The .net file is for our R&S physical topology and isn't specific to a
particular product (i.e. Vol I, Vol II, etc). Once you start it up you
can then load the initial configurations for the product/lab you are
working on.
Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 703
Outside US: 775-826-4344 x 703
Online Community: http://www.IEOC.com
CCIE Blog: http://blog.internetworkexpert.com
----- Original Message -----
From: "dave dave" <funccie@gmail.com>
Sent: Sun, July 27, 2008 20:51
Subject:Re: Help: Need Dynagen .net files for technology lab
Thanks Brian, but i am searching for the .net files for all Technology Lab
4.0 if anyone having those, please unicast me.
Thanks ?& Regards,
Dave
On 7/28/08, Brian Dennis <bdennis@internetworkexpert.com> wrote:
>
> Use the link below:
>
> http://www.internetworkexpert.com/resources/iosonpc.htm
>
> Also you should find a dynamips support forum added to our ieoc.com site
> this week.
>
> HTH,
>
> Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> Toll Free: 877-224-8987 x 703
> Outside US: 775-826-4344 x 703
> Online Community: http://www.IEOC.com <http://www.ieoc.com/>
> CCIE Blog: http://blog.internetworkexpert.com
>
>
>
>
>
> *----- Original Message -----*
> *From:* "dave dave" <funccie@gmail.com>
> *Sent:* Sun, July 27, 2008 7:43
> *Subject:* Help: Need Dynagen .net files for technology lab
>
> Hi,
>
> I need dynagen .net files for Internetwork Expert 4.0 technology lab.
>
> Regards,
> Dave
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART