Re: Macro for vlans

From: Shawn Zandi (szmetal@gmail.com)
Date: Sat Jul 26 2008 - 10:06:57 ART

• Next message: John: "Re: Spanning Tree / SVI / Trunk Allowed Vlan / Prunning"
• Previous message: David Lonnie: "BSR issue"
• Maybe in reply to: mab_bel@hotmail.com: "Macro for vlans"
• Next in thread: mab_bel@hotmail.com: "Re: Re: Macro for vlans"
• Maybe reply: mab_bel@hotmail.com: "Re: Re: Macro for vlans"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

switchport access vlan $AVID,

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swmacro.html

--
Sincerely,
Shawn Zandi
Routing, Switching & Security Consultant
CCIE (Routing & Switching) - MCSE
Dubai Internet City - Building 13
web: http://www.shafagh.com
email: shafagh@shafagh.com
On Sat, Jul 26, 2008 at 3:23 PM, <mab_bel@hotmail.com> wrote:
>
> Hi All
>
> I cannot find the correct syntax in DocCD, on how to assign a name to a vlan
> using a macro.
> I used this script, but with no result.
>
> macro name VLAN
> vlan $VLAN_ID
> name VLAN_$VLAN_ID
> # macro keywords VLAN_ID
> @
>
> Thanks

• Next message: John: "Re: Spanning Tree / SVI / Trunk Allowed Vlan / Prunning"
• Previous message: David Lonnie: "BSR issue"
• Maybe in reply to: mab_bel@hotmail.com: "Macro for vlans"
• Next in thread: mab_bel@hotmail.com: "Re: Re: Macro for vlans"
• Maybe reply: mab_bel@hotmail.com: "Re: Re: Macro for vlans"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART