From: Darren Horobin (Darren.Horobin@ipi-group.co.uk)
Date: Thu Jul 24 2008 - 10:41:42 ART
Guys,
We have currently have 7206VXR - NPE-G2 with a single PA-MC-STM1 to give
us E1 aggregation. We have had a number of clocking issues in relation
to this setup, which I believe we have resolved. But I have a number of
questions, which I would like answering. If anyone can assist that would
be great.
1. When the PA-MC-STM1 is set to clock from line, how does is
clock/synchronize from line
a. Does it use the S1 byte (Sync) within the STM1/STS1 header
b. Does is use the Frame Alignment Word
2. When Synchronized to a Primary Reference clock, will this
synchronize the internal oscillator of the router to this PRC, would I
need the network-clock-select command?
3. If I install a further card PA-MC-STM1 in the router, would
this need to clock internal (to the oscillator) or to line
Any pointers would be great
Cheers
Darren
Darren Horobin
Registered Office:
IP Infrastructures
Cedar Court Office Park
Denby Dale Road
Wakefield
WF4 3QZ
Tel: 0870 160 3537
Fax: 0870 160 3540
http://www.ipi-group.co.uk/
Company Registration Number: 04657026
IPIR (and Device) is a registered trade mark of IP Infrastructures Ltd.
This email and any files transmitted with it are confidential and intended
solely for the use of ccielab@groupstudy.com. If you are not the intended
recipient be aware that any disclosure, copying distribution or use of the
contents of this information is prohibited. If you have received this email in
error please notify the system administrator. Please note that any views or
opinions presented in this email are solely those of the author and do not
necessarily represent those of the company. Finally, the recipient should
check this email and any attachments for the presence of viruses. The company
accepts no liability for any damage caused by any virus transmitted by this
email.
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:56 ART