PPPoFR Multilink Scenario +/-

From: Dennis Worth (dennis.worth@gmail.com)
Date: Sun Jul 20 2008 - 00:29:54 ART

• Next message: Joseph Brunner: "RE: RA VPN users can not ping remote LAN"
• Previous message: Nick Matthews: "IPv6 NAT-PT issue"
• Next in thread: Scott Morris: "RE: PPPoFR Multilink Scenario +/-"
• Maybe reply: Scott Morris: "RE: PPPoFR Multilink Scenario +/-"
• Maybe reply: Dennis Worth: "Re: PPPoFR Multilink Scenario +/-"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hey group,

I have a ppp over frame multilink scenario on a prac-LAB.

R3 has 2 interface s1/1 and s1/0 with DLCI's assigned 304/305 in S1/0 , and
314/315 in S1/1.

R3 connect's to two spoke routers over frame and R4 and R5 which also tying
DLCI's 503/513 int s0/0 on R5 and 403/413 on R4.

I need to use p-t-p subs everywhere , but wanted to test it out with PHY's,
and things seem to be working.

What I am trying to determine is if there is any design problems or corner
case issues that could come.

Any thoughts on this setup? Please let me know.

Thank You,

Dennis Worth

• Next message: Joseph Brunner: "RE: RA VPN users can not ping remote LAN"
• Previous message: Nick Matthews: "IPv6 NAT-PT issue"
• Next in thread: Scott Morris: "RE: PPPoFR Multilink Scenario +/-"
• Maybe reply: Scott Morris: "RE: PPPoFR Multilink Scenario +/-"
• Maybe reply: Dennis Worth: "Re: PPPoFR Multilink Scenario +/-"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART