From: Marc La Porte (marc.a.laporte@gmail.com)
Date: Fri Jul 18 2008 - 16:45:15 ART
Hi,
Could you please provide the configuration of R1 and R4 as well?
In answer to your other question: ping will work because of FR config
Thanks
Marc
On Fri, Jul 18, 2008 at 9:35 PM, Zealist Hamamd <zealist@gmail.com> wrote:
> Hies all,
>
> I have 2 questions regarding OSPF Networks(NBMA etc)
>
> 1)
> I was working on IE technology labs for OSPF . While working i am getting
> error despite i m using same config as in IE OSPF lab under heading "Common
> Multi Area Config with two ABRs". Also neighbor relations do not form .
> Can
> someone identify me what i m doing wrong ??????
> MY config is this
>
> interface Loopback0
> ip address 150.1.5.5 255.255.255.0
> no ip directed-broadcast
> no sh
> !
> interface Serial0/0
> ip address 155.1.0.5 255.255.255.0
> no ip directed-broadcast
> encapsulation frame-relay
> ip ospf priority 0
> no sh
> frame-relay map ip 155.1.0.1 501
> frame-relay map ip 155.1.0.4 504
> no frame-relay inverse-arp
> !
> router ospf 1
> router-id 150.1.5.5
> network 150.1.5.5 0.0.0.0 area 0
> network 155.1.0.5 0.0.0.0 area 0
> neighbor 155.1.0.1
> neighbor 155.1.0.4
> !
>
> 00:03:40: %OSPF-5-ADJCHG: Process 1, Nbr 0.0.0.0 on Serial0/0 from ATTEMPT
> to DOWN, Neighbor Down: Dead timer expire%
> R7(config)#
> R7(config)#
> 00:03:42: %OSPF-5-ADJCHG: Process 1, Nbr 0.0.0.0 on Serial0/0 from ATTEMPT
> to DOWN, Neighbor Down: Dead timer expired
>
>
> 2)
> While doing NBMA is it must to give neighbor command as when i config
> sample
> lab i didnt give neigbor command but the routers can still ping
> each other.?????
>
> --
> zealist@gmail.com
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART