From: Ccie Go (goccie30@yahoo.com)
Date: Fri Jul 18 2008 - 08:05:11 ART
Hi @All,
I need a
clarification on the following items:
1. When the
question is about the voice quality for the VoIP users is there any difference
between following 2 statements:
class-map VoIP
match access-group name VoIP
!
ip access-list extended VoIP
permit tcp any any eq 1720
permit udp any any
range 16384 32767
vs
class-map VoIP
match protocol rtp audio
1. When you
are asked to block the AUTO-RP announce and discovery messages from leaving
out an interface, are both of the following option valid solution ??
access-list 10 deny 224..0.1.39
access-list 10 deny 224.0.1.40
access-list 10
permit any
!
interface Ethernet0/
ip multicast boundary 10
VS
access-list 10
deny 224.0.1.39
access-list 10 deny 224.0.1.40
access-list 10 permit any
!
interface Ethernet0/0
ip multicast boundary 10 filter-autorp
My lab date
is in couple of
weeks and now I try to see what the remaining gaps are after
doing my entire
preparation based only on IE resources. Ive done almost all
labs from Vol2 and
the Mock Labs 3,4,5,6 and before the Lab I would like to do
2-3 labs from NMC
as I understood their labs are a bit different from the
design perspective. In
this regard I would like to ask you recommend me 203
labs I should take from
NMC or other vendor.
BTW if somebody of you is
planning
to take the lab in the next coming weeks and if you are living in
Muenchen Germany
then lets prepare together in for the next coming weeks. If
interested, unicast
me for further details.
Thanks,
Lucian
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART