From: Rich Collins (nilsi2002@gmail.com)
Date: Wed Jul 16 2008 - 12:50:59 ART
Shouldn't HSRP be able to handle most of your requirements?
On Wed, Jul 16, 2008 at 11:41 AM, john white <johnwhite2008@gmail.com>
wrote:
> Hi Gents,
>
> I have a situation here and would like your assistance. I am preparing for
> my ccie lab and this problem is killing me.
>
>
> I have two Cisco 6506 switches which i would like to configure for high
> availability (preferably both active at the same time). I also would like
> to
> run OSPF between the two switches
>
> I have servers that will be connecting to these switches. These servers are
> in pairs ( i.e two servers both providing the same service to the same
> clients and with same IP address)
>
> I plan to connect each server in a pairing to a different 6506 switch to so
> that in case of failure of one switch or one server, users can still access
> this service via the second server.
>
> The problem is ,
>
> If a server fails , how do the switches route / switch to the second
> server
> ( in the pairing)
> How do i connect these servers to the network bearing in mind they will be
> accessed with the same IP Address
>
> Please advice
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART