From: Nitro Drops (nitrodrops@hotmail.com)
Date: Tue Jul 15 2008 - 09:22:25 ART
Hi Folks,
Need some kind explanations on the followings :
1.) ip ospf dead-interval minimal hello-multiplier 3
Task - asked to "configure the network so that R1 can detect a loss of Frame Relay circuit
to R2 within a second".
Qns - can i set the hello-multiplier to any values say from 1 to 5? My understanding is this is the no. of hellos sent during the 1 minute.
2.) metrics for Redistribution into EIGRP for connected interfaces
Task - Redistribut R1's connected interfaces into EIGRP domain
Qns - if didnt mention any particular metrics, what are the default metrics i can use? can i just use 1 1 1 1 1?
router eigrp 1
redistributed connected metric 1 1 1 1 1
3.) KeyChain Operation
Have created the key-chains 1st, and apply to router's interfaces. However, have to apply and remove
say 2 or 3 times before the keychain will work for RIPv2 authentication. Any clues?
Using Dynamips, ios image : c3640-jk9o3s-mz.124-16.bin
4.) Multicast
Task - to configure all router's interfaces as sparse-dense-mode.
Qns - For Router's loopback, do i configure is as sparse-dense-mode or sparse-mode?
Much appreciated for any kind replies.
Cheers
Nit
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART