From: Matt Sherman (matt.sherman2@gmail.com)
Date: Sun Jul 13 2008 - 20:52:10 ART
Yes, theyre propagated. All VLANs were created on SW2 and the sh
vlan-switch output below shows them active on each switch.
Thanks,
Matt
_____
From: Igor Manassypov [mailto:imanassypov@rogers.com]
Sent: Sunday, July 13, 2008 7:49 PM
To: Matt Sherman; 'Jonathan Greenwood II'
Cc: ccielab@groupstudy.com
Subject: RE: Intra-VLAN connectivity - IEWB lab 4 (dynamips workbook)
can you confirm that the vtp is in sync - ie can you verify that vlans are
being propagated? Create a new vlan on the core and make sure it shows up on
the clients.
Matt Sherman <matt.sherman2@gmail.com> wrote:
Thanks for the response. Ive verified what you mentioned. The gateway
setting is one of the requirements but for now I cant ping SW2 which is the
gateway so it wont do me any good. I love Dynamips but sometimes Im not
sure if its a config problem or a Dynamips bug.
SW2#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa1/1, Fa1/3, Fa1/5, Fa1/13
Fa1/14, Fa1/15
6 VLAN0006 active
8 VLAN0008 active
12 VLAN_AB active Fa1/0
36 VLAN0036 active Fa1/6
43 VLAN0043 active
45 VLAN_DE active Fa1/4
55 VLAN0055 active
88 VLAN0088 active
255 VLAN0255 active
258 VLAN0258 active Fa1/2
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
SW4#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa1/0, Fa1/1, Fa1/2, Fa1/3
Fa1/5, Fa1/8, Fa1/9, Fa1/10
Fa1/11, Fa1/12
6 VLAN0006 active Fa1/6
8 VLAN0008 active
12 VLAN_AB active
36 VLAN0036 active
43 VLAN0043 active Fa1/4
45 VLAN_DE active
55 VLAN0055 active
88 VLAN0088 active
255 VLAN0255 active
258 VLAN0258 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
SW3#sh vlan-switch
*Mar 1 13:01:59.608: %SYS-5-CONFIG_I: Configured from console by console
SW3#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa1/1, Fa1/2, Fa1/4, Fa1/6
Fa1/7, Fa1/8, Fa1/9
6 VLAN0006 active
8 VLAN0008 active
12 VLAN_AB active
36 VLAN0036 active Fa1/3
43 VLAN0043 active Fa1/0
45 VLAN_DE active
55 VLAN0055 active
88 VLAN0088 active
255 VLAN0255 active
258 VLAN0258 active Fa1/5
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
====================================================================
SW2#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa1/7 on 802.1q trunking 1
Fa1/8 on 802.1q trunking 1
Fa1/9 on 802.1q trunking 1
Fa1/10 on 802.1q trunking 1
Fa1/11 on 802.1q trunking 1
Fa1/12 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa1/7 1-1005
Fa1/8 1-1005
Fa1/9 1-1005
Fa1/10 1-1005
Fa1/11 1-1005
Fa1/12 1-1005
Port Vlans allowed and active in management domain
Fa1/7 1,6-8,12,36,43,45,55,77,88,255,258
Fa1/8 1,6-8,12,36,43,45,55,77,88,255,258
Fa1/9 1,6-8,12,36,43,45,55,77,88,255,258
Fa1/10 1,6-8,12,36,43,45,55,77,88,255,258
Fa1/11 1,6-8,12,36,43,45,55,77,88,255,258
Port Vlans allowed and active in management domain
Fa1/12 1,6-8,12,36,43,45,55,77,88,255,258
Port Vlans in spanning tree forwarding state and not pruned
Fa1/7 1,6-8,12,36,43,45,55,77,88,255
Fa1/8 45,55
Fa1/9 45,55
Fa1/10 1,36,43,45,55,255,258
Fa1/11 1,45,55
Fa1/12 1,45,55
SW3#show int trunk
Port Mode Encapsulation Status Native vlan
Fa1/10 on 802.1q trunking 255
Fa1/11 on 802.1q trunking 255
Fa1/12 on 802.1q trunking 255
Fa1/13 on 802.1q trunking 255
Fa1/14 on 802.1q trunking 255
Fa1/15 on 802.1q trunking 255
Port Vlans allowed on trunk
Fa1/10 1-1005
Fa1/11 1-1005
Fa1/12 1-1005
Fa1/13 1-1005
Fa1/14 1-1005
Fa1/15 1-1005
Port Vlans allowed and active in management domain
Fa1/10 1,6,8,12,36,43,45,55,88,255,258
Fa1/11 1,6,8,12,36,43,45,55,88,255,258
Fa1/12 1,6,8,12,36,43,45,55,88,255,258
Fa1/13 1,6,8,12,36,43,45,55,88,255,258
Fa1/14 1,6,8,12,36,43,45,55,88,255,258
Fa1/15 1,6,8,12,36,43,45,55,88,255,258
Port Vlans in spanning tree forwarding state and not pruned
Fa1/10 1,6,8,12,36,43,45,55,88,255,258
Fa1/11 45,55
Fa1/12 45,55
Fa1/13 45,55
Fa1/14 45,55
Fa1/15 45,55,258
SW4#show int trunk
Port Mode Encapsulation Status Native vlan
Fa1/7 on 802.1q trunking 255
Fa1/13 on 802.1q trunking 255
Fa1/14 on 802.1q trunking 255
Fa1/15 on 802.1q trunking 255
Port Vlans allowed on trunk
Fa1/7 1-1005
Fa1/13 1-1005
Fa1/14 1-1005
Fa1/15 1-1005
Port Vlans allowed and active in management domain
Fa1/7 1,6,8,12,36,43,45,55,88,255,258
Fa1/13 1,6,8,12,36,43,45,55,88,255,258
Fa1/14 1,6,8,12,36,43,45,55,88,255,258
Fa1/15 1,6,8,12,36,43,45,55,88,255,258
Port Vlans in spanning tree forwarding state and not pruned
Fa1/7 1,6,8,12,36,43,45,55,88,255,258
Fa1/13 1,45,55
Fa1/14 1,45,55
Fa1/15 1,45,55,258
=====================================================
SW2#sh spanning-tree vlan 255 br
VLAN255
Spanning tree enabled protocol ieee
Root ID Priority 8192
Address cc07.15f0.000a
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 8192
Address cc07.15f0.000a
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
Interface Designated
Name Port ID Prio Cost Sts Cost Bridge ID Port
ID
-------------------- ------- ---- ----- --- ----- --------------------
-------
FastEthernet1/7 128.48 128 19 FWD 0 8192 cc07.15f0.000a
128.48
FastEthernet1/8 128.49 128 19 FWD 0 8192 cc07.15f0.000a
128.49
FastEthernet1/9 128.50 128 19 FWD 0 8192 cc07.15f0.000a
128.50
FastEthernet1/10 128.51 128 19 FWD 0 8192 cc07.15f0.000a
128.51
FastEthernet1/11 128.52 128 19 FWD 0 8192 cc07.15f0.000a
128.52
FastEthernet1/12 128.53 128 19 FWD 0 8192 cc07.15f0.000a
128.53
SW3#sh spanning-tree vlan 255 br
VLAN255
Spanning tree enabled protocol ieee
Root ID Priority 8192
Address cc07.15f0.000a
Cost 19
Port 51 (FastEthernet1/10)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address cc08.15f0.000a
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
Interface Designated
Name Port ID Prio Cost Sts Cost Bridge ID Port
ID
-------------------- ------- ---- ----- --- ----- --------------------
-------
FastEthernet1/10 128.51 128 19 FWD 0 8192 cc07.15f0.000a
128.51
FastEthernet1/11 128.52 128 19 BLK 0 8192 cc07.15f0.000a
128.52
FastEthernet1/12 128.53 128 19 BLK 0 8192 cc07.15f0.000a
128.53
FastEthernet1/13 128.54 128 19 FWD 19 32768 cc08.15f0.000a
128.54
FastEthernet1/14 128.55 128 19 FWD 19 32768 cc08.15f0.000a
128.55
FastEthernet1/15 128.56 128 19 FWD 19 32768 cc08.15f0.000a
128.56
SW4#sh spanning-tree vlan 255 br
VLAN255
Spanning tree enabled protocol ieee
Root ID Priority 8192
Address cc07.15f0.000a
Cost 38
Port 48 (FastEthernet1/7)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address cc09.15f0.000a
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
Interface Designated
Name Port ID Prio Cost Sts Cost Bridge ID Port
ID
-------------------- ------- ---- ----- --- ----- --------------------
-------
FastEthernet1/7 128.48 128 19 FWD 19 32768 cc06.1498.000a
128.54
FastEthernet1/13 128.54 128 19 BLK 19 32768 cc08.15f0.000a
128.54
FastEthernet1/14 128.55 128 19 BLK 19 32768 cc08.15f0.000a
128.55
FastEthernet1/15 128.56 128 19 BLK 19 32768 cc08.15f0.000a
128.56
=====================================================
SW2#sr int vlan 255
Building configuration...
Current configuration : 63 bytes
!
interface Vlan255
ip address 141.1.255.8 255.255.255.0
SW3#sr int vlan 255
Building configuration...
Current configuration : 102 bytes
!
interface Vlan255
ip address 141.1.255.9 255.255.255.0
no ip route-cache
ip ospf priority 0
end
SW4#sr int vla255
Building configuration...
Current configuration : 84 bytes
!
interface Vlan255
ip address 141.1.255.10 255.255.255.0
ip ospf priority 0
_____
From: Jonathan Greenwood II [mailto:gwood83@gmail.com]
Sent: Sunday, July 13, 2008 3:03 PM
To: Matt Sherman
Cc: ccielab@groupstudy.com
Subject: Re: Intra-VLAN connectivity - IEWB lab 4 (dynamips workbook)
Ip routing doesn't need to be enabled. You need to use the ip
default-gateway for the 2 client switches pointing to the main Switch and
make sure the SVI's are created on all 3 switches. Also make sure your
trunking is working and just ping it should work. Maybe post your config to
have a look if that doesn't work.
On Sun, Jul 13, 2008 at 12:58 PM, Matt Sherman <HYPERLINK
"mailto:matt.sherman2@gmail.com"matt.sherman2@gmail.com> wrote:
Hi,
The lab scenario I have is three switches, each with their own vlan 255
interface. All other VLANs are working that have routers plugged into
access ports. I see VLAN 255 as active on each switch and it shows up on
the trunks but there the local VLAN 255 interface cannot ping any of the
other switch s VLAN 255 interfaces. ARP requests fail. Can anyone tell me
what I m doing wrong?
Thanks,
Matt
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.4.10/1549 - Release Date: 7/12/2008
4:31 PM
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART