From: Jason Madsen (madsen.jason@gmail.com)
Date: Sun Jul 13 2008 - 19:15:28 ART
http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_bgp2.html#wp1013940
it looks as though the main benefit of using "continue" is to bypass
route-map entries when certain conditions are true. as you saw, everything
you were trying to accomplish was done with or without the "continue"
statement.
if you want to test to see if your IOS supports "continue", replace your
previous route-map with this one:
!
route-map TEST3 permit 10
match ip address prefix-list LOOPS
continue 30
set metric 200
set as-path prepend 65200
!
route-map TEST3 permit 20
set as-path prepent 65123 65 234
set metric 200
!
route-map TEST3 permit 30
assuming you are advertising more routes than those referenced in LOOPS, if
your IOS suports "continue" you should NOT see the prepended ASs 65123 and
65234 referenced in sequence entry 20. If your IOS doesn't support
"continue" than they should show up.
Jason
On Sun, Jul 13, 2008 at 3:35 PM, Hobbs <deadheadblues@gmail.com> wrote:
> hmm...actually on 2nd thought "continue" isnt even doing anything! :/
>
> I guess I just need to read some more to understand this command or like
> Scott said, maybe it isn't operational in this IOS.
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART