Task 4.1 BGP Peering - Using Dynamips Workbook

From: Nitro Drops (nitrodrops@hotmail.com)
Date: Thu Jul 10 2008 - 19:20:24 ART

• Next message: Brian McGahan: "Re: Task 4.1 BGP Peering - Using Dynamips Workbook"
• Previous message: Jonathan Greenwood II: "Re: FR self-pingable interface on hub"
• Next in thread: Brian McGahan: "Re: Task 4.1 BGP Peering - Using Dynamips Workbook"
• Maybe reply: Brian McGahan: "Re: Task 4.1 BGP Peering - Using Dynamips Workbook"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Task - Configure SW4 to authennticate its BGP peering session with BB2 using the password CISCO.

SW4
router bgp 200
 bgp router-id 150.1.10.10
 neighbour 183.1.105.5 remote-as 100
 neighbour 183.1.107.7 remote-as 200
 neighbour 192.10.1.254 remote-as 254
 neighbour 192.10.1.254 password CISCO

On CCO CD, it mentions command "neighbour 192.10.1.254 password CISCO" is using MD5.

However, i am not able to establish a peering with BB2 (192.10.1.254). I am able to ping BB2 from SW4.

Keeps getting this message on SW4
%TCP-6-BADAUTH: No MD5 digest from 192.10.1.254(179) to 192.10.1.10(54775) (RST)

I jumped into BB2 configs and have a look. I dont see any
"neighbour 192.10.1.10 remote-as 200" under BB2's BGP configurations.

Anyone experienced the same problem as me?

Thank you for any kind replies.

Cheers
Nit

• Next message: Brian McGahan: "Re: Task 4.1 BGP Peering - Using Dynamips Workbook"
• Previous message: Jonathan Greenwood II: "Re: FR self-pingable interface on hub"
• Next in thread: Brian McGahan: "Re: Task 4.1 BGP Peering - Using Dynamips Workbook"
• Maybe reply: Brian McGahan: "Re: Task 4.1 BGP Peering - Using Dynamips Workbook"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART