From: Scott Morris (swm@emanon.com)
Date: Thu Jul 10 2008 - 16:34:57 ART
The routers in 12.4 support is. It's short for "section" which is quite
cool. Switches do not support it.
I've used this on 2800's, 3800s, 7200's and 3725's personally, but I would
think it more tied to IOS than to a platform.
HTH,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ashish .
Sent: Thursday, July 10, 2008 3:31 PM
To: Tyson Scott
Cc: David Lonnie; Huan Pham; ccie; ccielab@groupstudy.com
Subject: Re: How I could see just the EIGRP running configuration
Hi Tyson,
On which IOS release " | s " switch is supported. I have only seen "
*show startup-config *[*|* {*begin* | *exclude* | *include*} *string*] " but
someone has shown this here
http://smacak.wordpress.com/2008/04/29/show-running-config-advanced-options/
Could u comment on IOS version..
Thanks & Regards..
On 6/20/08, Tyson Scott <tscott@ipexpert.com> wrote:
>
> section. It only shows that paticular section
>
> On Fri, Jun 20, 2008 at 11:31 AM, David Lonnie
> <david.lonnie@gmail.com>
> wrote:
> > what does "s" mean in "show run | s router eigrp"?
> >
> >
> > On Tue, Jun 17, 2008 at 2:54 PM, Huan Pham <
> Huan.Pham@peopletelecom.com.au>
> > wrote:
> >
> >> Try this, which is only availble in newer IOS versions.
> >>
> >> show run | s router eigrp
> >>
> >>
> >> -----Original Message-----
> >> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> >> Behalf Of ccie
> >> Sent: Tuesday, 17 June 2008 4:47 PM
> >> To: ccielab@groupstudy.com
> >> Subject: How I could see just the EIGRP running configuration
> >>
> >> Hi Experts,
> >>
> >>
> >>
> >> How I could see just the EIGRP running configuration, and not
> >> include anything more?
> >>
> >>
> >>
> >> SW1(config)#do sho run | b router eigrp
> >>
> >> router eigrp 10
> >>
> >> no auto-summary
> >>
> >> eigrp router-id 3.3.7.7
> >>
> >> !
> >>
> >> ip classless
> >>
> >> ip http server
> >>
> >> ip http secure-server
> >>
> >> !
> >>
> >>
> >>
> >> Regards,
> >>
> >> Amin
> >>
> >>
> >> ___________________________________________________________________
> >> ____ Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> ___________________________________________________________________
> >> ____ Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
>
>
>
> --
> Tyson Scott - CCIE #13513 R&S and Security Technical Instructor -
> IPexpert, Inc.
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> Mailto: tscott@ipexpert.com
>
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART