From: Jason Madsen (madsen.jason@gmail.com)
Date: Thu Jul 10 2008 - 12:47:56 ART
you created the vlans already, right? show vlan brief...
also, it's possible that one of your links is being blocked by spanning
tree. check your spanning tree state.
it's possible you will have to specify a different root for each group (odds
vs. evens) so that both links can be used without one being blocked / loops
occurring.
Jason
On Thu, Jul 10, 2008 at 9:37 AM, Razzaq Shaikh <shaikh.razzaq@gmail.com>
wrote:
> Hello,
>
> I need to know if the answer to this question is correct ;
>
> <Q> configure odd vlans on one port of trunk fastethernet 0/11 and even
> vlans on another port of the trunk fasethernet 0/12
> SW3======================SW4
>
> <Solution>
> <SW3> & <SW4>
> interface fa 0/11
> switchport trunk allowed vlan 51,53,55,57
>
> interface fa 0/12
> switchport trunk allowed vlan 52,54,56,58
>
>
> With the above solution ; I am not able to get traffic passed
> still............................
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART