Re: How can I access my home lab remotely

From: Graham Clarke (ciscosurplus@gmail.com)
Date: Tue Jul 08 2008 - 03:20:35 ART

Id like to see the 2511 config, basically you imply you connect the VPN then
can connect direct to devices without connecting to the 2511 first? Mine is
setup in such a way I fisrt have to telnet to the 2511 (I find ssh puts a
strain on it) the use the menu I created.

For power I use
http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP9565 -
This is the UK version but Im sure U/S one available too, with todays power
prices this is a very good buy! I did have some dangerous thing from
avoynisis before but it worked on some relay mechanism and kept blowing the
relay.

2008/7/8 Mark N <motu27@yahoo.com>:

> IOS supports EasyVPN server. Here's how I do it:
>
> Internet Provider---HFC---Cable Modem -> Linksys -> Cisco831 -> Cisco2511
> -> console of devices in my rack
>
> Configure EasyVPN server on the Cisco831 or any IOS box. Permit UDP port
> 500 and 4500 on the Linksys (and enable VPN passthrough). Install Cisco VPN
> client on your remote computer.
>
> Once VPN'd in, just fire up multiple SecureCRT windows as if you were home.
>
> I would love to get a managed power supply :-). What APC model do you
> recommend? Any other alternatives to remotely powering up my rack?
>
>
>
>
> ----- Original Message ----
> From: David Chances <davidchances@yahoo.com>
> To: cecil wilson <cecilw23@hotmail.com>; Victor Cappuccio <
> vcappuccio@gmail.com>; Shaughn Smith <shaughn.smith@za.verizonbusiness.com
> >
> Cc: Amir.Tahir/Wateen/Lahore <amir.tahir@wateen.com>;
> ccielab@groupstudy.com
> Sent: Thursday, June 19, 2008 2:31:09 PM
> Subject: Re: How can I access my home lab remotely
>
> I use a Cisco 871W with a dynamic IP from my ISP and then DynDns to do
> the host name mapping. I then SSH into the 871 and then telnet onto my
> APC's which fire up the routers, from there - I can telnet to a Cisco
> 2511 and access the entire rack. Works perfect for me over the past 2-3
> years. No issues.
>
>
> ----- Original Message ----
> From: cecil wilson <cecilw23@hotmail.com>
> To: Victor Cappuccio <vcappuccio@gmail.com>; Shaughn Smith <
> shaughn.smith@za.verizonbusiness.com>
> Cc: Amir.Tahir/Wateen/Lahore <amir.tahir@wateen.com>;
> ccielab@groupstudy.com
> Sent: Thursday, June 19, 2008 5:06:02 PM
> Subject: How can I access my home lab remotely
>
> Hello GS
> is there a way for me to access my home lab remote? eg from
> internet?
>
> thanks
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
> 

-- 
Thanks

Graham Clarke

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART