From: Roman Rodichev (roman@iementor.com)
Date: Sun Jul 06 2008 - 17:09:54 ART
You can also configure IPs from the same subnet on frame-relay subinterfaces
Roman Rodichev
5xCCIE #7927 (R&S, Security, Voice, Storage, Service Provider)
Instructor, Content Developer
ieMentor Corporation http://www.iementor.com
Y!M: roman7927
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Dale
Shaw
Sent: Sunday, July 06, 2008 3:05 PM
To: Edison Ortiz
Cc: Fahad Khan; Cisco certification
Subject: Re: IP address on serial interfaces of a router
Hi again,
On Sun, Jul 6, 2008 at 1:03 PM, Dale Shaw <dale.shaw@gmail.com> wrote:
> However, if you are only bridging, and not doing IP
> routing, then you can configure the two interfaces on the same subnet.
Maybe that's the answer?
Fahad, what device is this on, and what IOS? Do you have "ip routing"
enabled?
cheers,
Dale
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART