From: John (jgarrison1@austin.rr.com)
Date: Fri Jul 04 2008 - 14:04:38 ART
Etherchannel load balances by default, but how does it load balance. I
can't remember how so you'll have to look it up and then you'll know.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swethchl.html
----- Original Message -----
From: "Cisco Addicted" <cisco.addicted@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Friday, July 04, 2008 9:49 AM
Subject: Etherchannel load-balance
> Dears,
>
> I want to know what is to consider when deciding the ether channel load
> balancing if I may have the following scenario:
>
>
>
>
>
> VLANA-(Fa0/0--R1--Fa0/1)------ SW1 (3560)=== ===SW2 (3560)
> ------(fa0/1-R2----fa0/0) ----- VLAN C
>
>
>
> And considering there is a many users in VLAN-A accessing server on
> VLAN-C,
> and there is etherchannel trunk configured between SW1 & SW2.
>
>
>
> Thanks in advance.
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART