From: John (jgarrison1@austin.rr.com)
Date: Thu Jul 03 2008 - 19:57:43 ART
I have a task that seems not to work and I'm trying to make it work. It's
from IEW lab 16 task 7.2.
The topology is 3 routers in a frame hub and spoke. R3 is the hub R4 and R5
are the spokes. R4 and R5 are also connected via ethernet. In an earlier
task I was told to make ospf prefer R4 to get to the vlans connected to R4
and R5. I did this with ospf cost. This also causes R5 to prefer R4 to get
to R3.
Now I'm tasked with making R5 priority queue traffic sourced from 154.1.5.100
port 27960(vlan 5 on R5 f0/0) going to 154.1.3.0/24 (vlan 3003 on R3 f0/1). I
tried a policy map on the serial interface, but since R5 prefers R4 to get to
R3 no traffic hits that interface. I tried pbr on f0/0 with set interface,
but s0/0 is not P2P so I can't use a route-map. I thought about a static
route for 154.1.3.0/24 but that breaks the earlier requirement.
Any suggestions?
PS I've looked at IE's forum and no one else noticed that, but then again no
mentioned changing R5 f0/0's ip address to 154.1.5.100 and running a trace
from R5 with source as f0/0 and port at 27960
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART