From: CCIE3000 (ccie3000@googlemail.com)
Date: Thu Jul 03 2008 - 14:40:47 ART
I must admit the only time I've used it is pointing a static default route
to null 0.
I have track 1 and 2 which keep an eye out for the two routes I'm interested
in.
I then use the boolean with track 3 which is looking at tracks 1 and 2.
If 1 AND 2 are up then track 3 is UP, if either 1 or 2 is down then 3 is
down, if track 3 is up then the default static route to null 0 is in the
routing table. I then use default-information originate, which will only
advertise the default route via (ospf/RIP) if it has it in it's routing
table.
You could do the same with a static route, if your track 3 is not up then
the route will not be in the routing table then you can't redistribute it to
your other routing protocol.
But then again how often are you aloud to use Statics.
Hey Jason,
Are we getting closer to answering your question.....I'm enjoying this :)
Cheers,
Si
On 7/3/08, Scott Morris <swm@emanon.com> wrote:
>
> A nice idea for that, but while you can SET things using track in a
> route-map, I'm pretty sure you can't match them which is what you'd need to
> look for.
>
>
> http://www.cisco.com/en/US/tech/tk364/technologies_configuration_example09186a0080211f5c.shtml
>
>
>
> Scott Morris, *CCIE**4** #4713, JNCIE-M #153**, JNCIS-ER, CISSP, et al.
> **CCSI/JNCI-M/JNCI-ER
> *Senior CCIE Instructor
>
> smorris@internetworkexpert.com
>
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
> Knowledge is power.
> Power corrupts.
> Study hard and be Eeeeviiiil......
>
> ------------------------------
> *From:* CCIE3000 [mailto:ccie3000@googlemail.com]
> *Sent:* Thursday, July 03, 2008 3:34 AM
> *To:* Morris, Jason L.
> *Cc:* swm@emanon.com; GS CCIE-Lab
> *Subject:* Re: using 'and' matching logic in a route-map
>
>
> Hi Jason,
>
> Taken from the DOC CD.
>
> track 1 interface serial2/0 line-protocol
> track 2 interface serial2/1 line-protocol
> track 100 list boolean and
> object 1
> object 2
>
> You then redis C only if track 100 is true
>
>
> http://www.cisco.com/en/US/docs/ios/ipapp/command/reference/iap_s3.html#wp1013937
>
> Cheers,
>
> Si
>
>
> On 7/3/08, Morris, Jason L. <Jasmorris@checkngo.com> wrote:
>>
>> Ok, maybe I should be asking a broader question...
>>
>> This route map is being tacked onto a 'redistribute' command
>>
>> If I have a requirement to redistribute route 'C' only if route 'A' and
>> route 'B' are in my routing table... how would I accomplish that...
>>
>>
>> Jason Morris
>>
>>
>> -----Original Message-----
>> From: Scott Morris [mailto:swm@emanon.com]
>> Sent: Wednesday, July 02, 2008 9:38 PM
>> To: Morris, Jason L.; 'GS CCIE-Lab'
>> Subject: RE: using 'and' matching logic in a route-map
>>
>> Because the router knows you should not introduce insanity into the mix.
>> Can the SAME ip packet really match BOTH acl's?
>>
>> It's part of the great Cisco mantra of reducing ID-Ten-T errors on the
>> network.
>>
>>
>> Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
>> CCSI/JNCI-M/JNCI-ER
>> Senior CCIE Instructor
>>
>> smorris@internetworkexpert.com
>>
>>
>>
>> Internetwork Expert, Inc.
>> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
>> Toll Free: 877-224-8987 x 705
>> Outside US: 775-826-4344 x 705
>> 24/7 Support: http://forum.internetworkexpert.com
>> Live Chat: http://www.internetworkexpert.com/chat/
>>
>> Knowledge is power.
>> Power corrupts.
>> Study hard and be Eeeeviiiil......
>>
>>
>> -----Original Message-----
>> From: Morris, Jason L. [mailto:Jasmorris@checkngo.com]
>> Sent: Wednesday, July 02, 2008 9:16 PM
>> To: swm@emanon.com; GS CCIE-Lab
>> Subject: RE: using 'and' matching logic in a route-map
>>
>> Ok, first question answered...
>>
>> Second question is, why is it doing this
>>
>> R8(config-route-map)#do sho run | s route-map route-map default-route
>> permit
>> 10 R8(config-route-map)#route-map default-route permit 10
>> R8(config-route-map)#match ip address 1 <-------- ENTERED ON 2 LINES
>> R8(config-route-map)#match ip address 2 <--------
>> R8(config-route-map)#do
>> sho run | s route-map route-map default-route permit 10 match ip
>> address 1
>> 2 <-------------------------- DISPLAYED ON 1 LINE R8(config-route-map)#
>>
>>
>> .... I'm confused....
>>
>> Jason Morris
>>
>>
>> -----Original Message-----
>> From: Scott Morris [mailto:swm@emanon.com]
>> Sent: Wednesday, July 02, 2008 9:06 PM
>> To: Morris, Jason L.; 'GS CCIE-Lab'
>> Subject: RE: using 'and' matching logic in a route-map
>>
>> Correct. Same line = OR. Multiple lines = AND.
>>
>> HTH,
>>
>>
>> Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
>> CCSI/JNCI-M/JNCI-ER
>> Senior CCIE Instructor
>>
>> smorris@internetworkexpert.com
>>
>>
>>
>> Internetwork Expert, Inc.
>> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
>> Toll Free: 877-224-8987 x 705
>> Outside US: 775-826-4344 x 705
>> 24/7 Support: http://forum.internetworkexpert.com
>> Live Chat: http://www.internetworkexpert.com/chat/
>>
>> Knowledge is power.
>> Power corrupts.
>> Study hard and be Eeeeviiiil......
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> Morris, Jason L.
>> Sent: Wednesday, July 02, 2008 9:02 PM
>> To: GS CCIE-Lab
>> Subject: using 'and' matching logic in a route-map
>>
>> Match ip address 1
>> Match ip address 2
>>
>> Vs
>>
>> Match ip address 1 2
>>
>> Example 1 should match ACL 1 '&' 2 and example 2 should match ACL 1 'or'
>> 2 right?
>>
>> Jason Morris
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> Matt
>> Bentley
>> Sent: Wednesday, July 02, 2008 8:52 PM
>> To: Marko Milivojevic
>> Cc: GS CCIE-Lab
>> Subject: Re: SFP vs GBIC
>>
>> And to know what kind of cable goes in which
>>
>> LC Cable ends - go into SFPs
>> http://www.shcomwork.com/uploadpic/20068228521140041.jpg
>>
>> SC Cable ends - go into GBICs
>>
>> The cable ends can have one on one side and another on the other.
>> Doesn't
>> really matter.
>>
>> Also, another word on SFPs - you have both the SX and LX flavors - with
>> the
>> LX, of course, being able to span longer distances. You usually need
>> single-mode (color codes vary) for LX and multimode cable for SX (colors
>> vary), although depending on what distance you need to traverse you can
>> get
>> away with swapping
>>
>> SFPs can be either 1GB (show above) or 10GB. Rumors are that 100GB is
>> coming down the pipe Here is what a 10GB SFP (referred to as XFP) looks
>> like
>> http://www.t3systemsinc.com/catalog/images/XFP-10G.gif
>>
>> 10GB "gbics" - also referred to as zenpaks look like this.
>> http://www.t3systemsinc.com/catalog/images/XENPAK-10GB.gif
>>
>> As has been said before - these are either put into a small-footprint
>> switch
>> (ie 3550, 3750, etc.,) or in big chassis - like 6500s through linecards
>> that
>> can handle multiple of the same reciever (6704, 6724, etc., )
>>
>> HTH
>>
>> Matt Bentley
>>
>> On Wed, Jul 2, 2008 at 8:39 PM, Marko Milivojevic <markom@markom.info>
>> wrote:
>>
>> > Someone cynical might add that with the advent of SFP which has an
>> > identifiable eprom on it, it's much easier for vendors to enforce the
>> > use of "compatible" modules. Contrary to popular belief, Cisco is by
>> > far not the worst in this practice. Certain middle-eastern anagram for
>>
>> > ice comes first... (~$1500 for STM-1/OC3 rebranded Agilent SFP !!!)
>> >
>> > On Thu, Jul 3, 2008 at 00:24, Tony Schaffran (GS)
>> > <groupstudy@cconlinelabs.com> wrote:
>> > > They are both just media converters.
>> > >
>> > > The difference is mostly physical.
>> > >
>> > > The SFP comes in LC and the GBIC is SC
>> > >
>> > > And both come in copper RJ45 as well.
>> >
>> >
>> >
>> _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART
