From: CCIE3000 (ccie3000@googlemail.com)
Date: Thu Jul 03 2008 - 03:49:38 ART
If you enable ip route profile, would this give you an indication that you
have a loop?
On 7/3/08, Tolstykh, Andrew <ATolstykh@integrysgroup.com> wrote:
>
> Debug ip routing
>
> -----Original Message-----
> From: cisco-nsp-bounces@puck.nether.net
> [mailto:cisco-nsp-bounces@puck.nether.net] On Behalf Of almog ohayon
> Sent: Wednesday, July 02, 2008 3:24 PM
> To: cisco-nsp@puck.nether.net; Cisco certification
> Subject: [c-nsp] Routing loop..
>
> Hi,
> How can i notice that there is a routing loop ??
> This question is regarding CCIE R&S of course ...
> _______________________________________________
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited. If you received
> this in error, please contact the sender and delete the material from any
> computer.
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:53 ART