From: Scott Morris (swm@emanon.com)
Date: Fri Jun 27 2008 - 10:29:54 ART
You could probably go either direction.... Remember, your "ip host" command
involved a name, an IP address and an optional port numer.
So on either termserv (physical or dynamips) you could have the OTHER
device's IP address and port number assined set up in the host table.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
<http://forum.internetworkexpert.com/>
Live Chat: http://www.internetworkexpert.com/chat/
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
_____
From: ccie23 ccie23 [mailto:ccie2323@gmail.com]
Sent: Friday, June 27, 2008 5:55 AM
To: Scott Morris; Cisco certification
Subject: Re: IE topology Dynamips and Real cisco gear question.
Hi Scott,
Thank you for taking time to answer my question. i would to ask
again, do u think its possible to use a real terminal server to connect to
that 4 real switches then using the real TermServ to reverse telnet to
dynamips.
On Fri, Jun 27, 2008 at 1:27 PM, Scott Morris <swm@emanon.com> wrote:
Let me start with the "I haven't tried it" answer....
But I'm pretty sure the answer is no.
The terminal server in dynamips is completely a virtual/pseudo-telnet sort
of thing. IF it were possible, just like you map ethernet ports to real
ethernet cards, you would need to map the terminal server's ports to unique
and physical serial ports.
So your computer would therefore need at least four serial ports.
I just don't believe it does.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie23 ccie23
Sent: Friday, June 27, 2008 1:21 AM
To: Cisco certification
Subject: IE topology Dynamips and Real cisco gear question.
Hi all experts,
I would like to find out if it is possible for the TermServ in
dynamips to reverst telnet to 4 real switches. If it is possible please
advice how could i do it?
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:23 ART