From: Scott Morris (swm@emanon.com)
Date: Fri Jun 27 2008 - 02:27:38 ART
Let me start with the "I haven't tried it" answer....
But I'm pretty sure the answer is no.
The terminal server in dynamips is completely a virtual/pseudo-telnet sort
of thing. IF it were possible, just like you map ethernet ports to real
ethernet cards, you would need to map the terminal server's ports to unique
and physical serial ports.
So your computer would therefore need at least four serial ports.
I just don't believe it does.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie23 ccie23
Sent: Friday, June 27, 2008 1:21 AM
To: Cisco certification
Subject: IE topology Dynamips and Real cisco gear question.
Hi all experts,
I would like to find out if it is possible for the TermServ in
dynamips to reverst telnet to 4 real switches. If it is possible please
advice how could i do it?
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:23 ART