From: Larry (cc13lab@gmail.com)
Date: Wed Jun 25 2008 - 09:26:33 ART
Amin,
You can use MQC to mark de then apply to the frame interface/dlci:
Rack1R2(config)#policy-map MARK_DE
Rack1R2(config-pmap)#class class-default
Rack1R2(config-pmap-c)#set ?
atm-clp Set ATM CLP bit to 1
cos Set IEEE 802.1Q/ISL class of service/user priority
discard-class Discard behavior identifier
dscp Set DSCP in IP(v4) and IPv6 packets
fr-de Set FR DE bit to 1
ip Set IP specific values
mpls Set MPLS specific values
precedence Set precedence in IP(v4) and IPv6 packets
qos-group Set QoS Group
Rack1R2(config-pmap-c)#set fr-de
-larry
On 6/25/08, ccie <ccie@just-horizon.com> wrote:
>
> Hi experts,
>
>
>
> Without configuring frame-relay de-list and apply it on a frame-relay link
> using the frame-relay de-group. Is there any other situation in which the
> router mark a frame with DE?
>
>
>
> Regards,
>
> Amin
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:23 ART