From: Jordan (zdh1207@gmail.com)
Date: Sun Jun 22 2008 - 04:07:42 ART
Hi,groups,
I am in trouble to use my Vista to connect to a PIX 515E version
7.2 by IPSec VPN. the PIX debug message shows as:
Group = guestgroup, IP = xx.xx.xx.xx, Removing peer from peer table
failed, no match!
Jun 22 14:50:56 [IKEv1]: Group = guestgroup, IP = xx.xx.xx.xx, Error:
Unable to remove PeerTblEntry
How to solve this promble? the PIX's relative configuration is:
------------------------------------------------------------------------------------------
crypto ipsec transform-set firstset esp-des esp-sha-hmac
crypto dynamic-map dyn1 1 set transform-set firstset
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption des
hash sha
group 2
lifetime 43200
tunnel-group guestgroup type ipsec-ra
tunnel-group guestgroup general-attributes
address-pool guest
tunnel-group guestgroup ipsec-attributes
pre-shared-key *
--------------------------------------------------------------------------------
thanks in advance.
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART