From: John (jgarrison1@austin.rr.com)
Date: Sat Jun 21 2008 - 19:13:16 ART
I can not figure out what I'm doing wrong. The only thing I can think of is
the route source. I've tried 150.1.3.3 the neighbor the route is coming from
and 167.1.58.8 which is the source of the aggregate route. I'm being obtuse
any help would be greatly appreciated. The config is as follows.
bgp inject-map inject exist-map exist
route-map inject permit 10
set ip address prefix-list sw1lo0
route-map exist permit 10
match ip address prefix-list routesource agg
ip prefix-list agg seq 5 permit 150.1.0.0/20
!
ip prefix-list routesource seq 5 permit 167.1.58.8/32
!
ip prefix-list sw1lo0 seq 5 permit 150.1.7.0/24
R6(config)#do sh ip bgp 150.1.0.0
BGP routing table entry for 150.1.0.0/20, version 12
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Advertised to update-groups:
2 3
65078, (aggregated by 65078 150.1.8.8)
167.1.58.8 (metric 2716160) from 150.1.3.3 (150.1.3.3)
Origin IGP, metric 0, localpref 100, valid, internal, atomic-aggregate,
best
Originator: 150.1.5.5, Cluster list: 150.1.3.3
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART