From: Tim (ccie2be@nyc.rr.com)
Date: Fri Jun 20 2008 - 10:33:12 ART
Hey guys,
This is driving me batty.
I setup aaa authen but it's failing.
Here's the debug output:
%PIX-6-113014: AAA authentication server not accessible : server =
10.0.0.100 : <----- NOT TRUE, see ping below.
user = cisco123
%PIX-6-109006: Authentication failed for user 'cisco123' from
183.1.19.12/2811 t
o 183.1.19.100/80 on interface inside
%PIX-6-302014: Teardown TCP connection 9230 for inside:10.0.0.100/49 to NP
Ident
ity Ifc:183.1.19.9/1048 duration 0:00:01 bytes 96 TCP FINs
%PIX-6-302014: Teardown TCP connection 9227 for outside:183.1.19.100/80 to
insid
e:183.1.19.12/2811 duration 0:00:59 bytes 135 TCP FINs
%PIX-6-302013: Built outbound TCP connection 9231 for
outside:183.1.19.100/80 (1
83.1.19.100/80) to inside:183.1.19.12/2834 (183.1.19.12/2834)
%PIX-6-109001: Auth start for user '???' from 183.1.19.12/2834 to
183.1.19.100/8
0
%PIX-6-302013: Built outbound TCP connection 9232 for inside:10.0.0.100/49
(10.0
.0.100/49) to NP Identity Ifc:183.1.19.9/1049 (183.1.19.9/1049)
PIX(config)# ping 10.0.0.100
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.100, timeout is 2 seconds:
!!!!!
Why would the debug say "AAA authen server not accessible when it is?
I thought maybe the shared key wasn't correct or maybe the ip addresses
weren't correct but I checked them and they're all correct.
Thanks, Tim
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART