From: cecil wilson (cecilw23@hotmail.com)
Date: Thu Jun 19 2008 - 13:06:02 ART
Hello GS
is there a way for me to access my home lab remote? eg from internet?
thanks
> Date: Thu, 19 Jun 2008 17:38:43 +0200> From: vcappuccio@gmail.com> To:
Shaughn.Smith@za.verizonbusiness.com> Subject: Re: Frame-Relay Query> CC:
Amir.Tahir@wateen.com; ccielab@groupstudy.com> > Hi Amir, check out the
archive about this topic> > Those wonderful days! :)>
http://www.groupstudy.com/archives/ccielab/200607/msg01025.html> > Tim4s reply
is an eye opener>
http://www.groupstudy.com/archives/ccielab/200603/msg00484.html> > Have fun> >
> > On Thu, Jun 19, 2008 at 1:25 PM, Shaughn Smith <>
Shaughn.Smith@za.verizonbusiness.com> wrote:> > > Hi> >> > If you are running
IETF why do you just not change the Encapsulation> > type on the main
interface instead of doing it with the mapping command> >> > What IP address
have you assigned on the S1/0 interface ?> >> > So in essence do this> >> >> >
Int s 1/0> >> > Enc frame-relay IETF> >> > Frame map ip 131.1.123.1 201
broadcast> >> > Frame map ip 131.1.123.3 201 broadcast> >> >> >> >> >> >> >
-----Original Message-----> > From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of> > Amir.Tahir/Wateen/Lahore> >
Sent: Thursday, June 19, 2008 1:10 PM> > To: ccielab@groupstudy.com> >
Subject: Frame-Relay Query> >> > Hi Experts,> >> >> >> > I am trying to
configure Cisco and non-Cisco router in hub-&-Spoke> > configuration.> >> >
Non Cisco router is using IETF encapsulation. If I have to ping my own> >
interface, do I have to provide IETF in mapping...> >> > Sample Configurations
of R2 are as follows:> >> >> >> > R1 = Hub (non-Cisco Router)> >> > R2 & R3
are spokes (Cisco Routers)> >> >> >> > R2 Confs> >> > Int s 1/0> >> > Enc
frame-relay> >> > Frame map ip 131.1.123.1 201 br ietf> >> > Frame map ip
131.1.123.3 201 ietf> >> > Fram map ip 131.1.123.2 201 ietf --- need to
confirm> >> >> >> > Thanks for help in advance> >> >> >> > Regards> >> >
__________________> >> > Amir Tahir> >> >> >
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART