From: Akhtar Rasool (akhtar.samo@gmail.com)
Date: Thu Jun 19 2008 - 02:29:34 ART
Hi Sadiq,
I am using IOS Version 12.2(18)SXF12a. I have met the requirement by using
VACLs. But in case i remove Etherchannel & add that port as promiscuous will
the vlan translation or L3 switching b/w PVLANs would happen ?? as the
device after CAT6K is non-Cisco FW which is not supporting PVLANs. Any idea
on that ??
Regards,
Akhtar
On Thu, Jun 19, 2008 at 12:39 AM, Sadiq Yakasai <sadiqtanko@gmail.com>
wrote:
> Hmmm, thats a tricky one John. This is an excerpt from the documentation
> for the feature: "Do not configure ports that belong to a PAgP or LACP
> EtherChannel as private VLAN ports. While a port is part of the private VLAN
> configuration, any EtherChannel configuration for it is inactive."
>
>
> http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swpvlan.html
>
> I think its a tricky one. Some releases for the Cat6Ks dont actually
> support pVLANs. What IOS are you running?
>
> Anyway, what about L2/MAC ACLs? VACLs? Those are some options that you have
> anyway...
>
> HTH a little.
> Sadiq
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART