From: Ed (maillist.ed@gmail.com)
Date: Tue Jun 17 2008 - 22:45:52 ART
Try changing your config register in ROMMON to 0x2142, then reload?
On Wed, Jun 18, 2008 at 5:54 AM, Alexei Monastyrnyi <alexeim@orcsoftware.com>
wrote:
> Looks like it is both :-)
>
> Mohammad,
> you may find this URL helpful in a way.
>
> http://cciepursuit.wordpress.com/2007/06/29/completely-clearing-a-cisco-switchkinda/
>
> You may also find it helpful to check the MD5 sum for your .bin file.
> Your sum should be 8b18362e5927654d1861ca3a8a88f559 - just to be on the
> safe side. I have downloaded the same c3560-ipbase-mz.122-25.SEE4 file from
> cisco.com and it happens to be 6433223 bytes vs yours 6433280 (from dir
> flash:). Though it may be a just a sort of size alignment on the file system
> level, but still.
>
> I'll try to cable up my lab this week (planned to do that anyway, it's been
> collecting dust for almost 6 months after we moved to a new office :-) ), so
> I'll have a look at some ROMMON stuff on my 3560 one.
>
> A.
>
>
> Tyson Scott wrote:
>
>> Muhammad is right. The password recovery proceedure is to delete the
>> file config.text in the flash. If you have done this and it is still
>> not booting then I hope you have the switch under a support contract.
>>
>> On Tue, Jun 17, 2008 at 8:12 AM, Muhammad Nasim
>> <muhammad.nasim@gmail.com> wrote:
>>
>>
>>> how to see NVRAM or delete the inital config from NVRAM using ROMMON?
>>>
>>> dir flash which I did was in ROMMON mode
>>>
>>> Thanks
>>>
>>>
>>> 2008/6/17 Farrukh Haroon <farrukhharoon@gmail.com>:
>>>
>>>
>>>
>>>> As others have stated, the config file is in the NVRAM:
>>>>
>>>> SW-F3#dir nvram:
>>>> Directory of nvram:/
>>>> 495 -rw- 15447 <no date> startup-config
>>>> 496 ---- 5 <no date> private-config
>>>> 524288 bytes total (508784 bytes free)
>>>>
>>>> Regards
>>>>
>>>> Farrukh
>>>>
>>>> On Tue, Jun 17, 2008 at 2:11 PM, Muhammad Nasim <
>>>> muhammad.nasim@gmail.com>
>>>> wrote:
>>>>
>>>>
>>>>
>>>>> Following is the only file in my FLASH
>>>>>
>>>>> switch: dir flash:
>>>>> Directory of flash:/
>>>>>
>>>>> 2 -rwx 6433280 <date>
>>>>> c3560-ipbase-mz.122-25.SEE4.bin
>>>>>
>>>>> 9564672 bytes available (6434304 bytes used)
>>>>>
>>>>> so no config files are present
>>>>>
>>>>>
>>>>> 2008/6/17 Muhammad Nasim <muhammad.nasim@gmail.com>:
>>>>>
>>>>>
>>>>>
>>>>>> The following is the link in which Passoword recovery is there.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml
>>>>>
>>>>>
>>>>>> I deleted all the files from FLASH. when I went to ROMMON. that means
>>>>>> I
>>>>>> delted all the config files and it should go into the Initial config
>>>>>>
>>>>>>
>>>>> dialog
>>>>>
>>>>>
>>>>>> but it is not it is hanging .
>>>>>>
>>>>>> after reading the above link i think the startup config stored in
>>>>>> FLASH
>>>>>> which no more there in the flash
>>>>>>
>>>>>> I tried with this procesure to install the new image via XMODEM. Image
>>>>>> installation went well but still it is hanging on the same place
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2008/6/17 Alexei Monastyrnyi <alexeim@orcsoftware.com>:
>>>>>>
>>>>>> the config files are actually in NVRAM
>>>>>>
>>>>>>
>>>>>>> did you try it with password recovery procedure to avoid loading your
>>>>>>> current config?
>>>>>>>
>>>>>>> once you are there in enable mode you can try to "write erase" to
>>>>>>> wipe
>>>>>>> out the NVRAM content
>>>>>>>
>>>>>>> HTH
>>>>>>> A.
>>>>>>>
>>>>>>> Muhammad Nasim said the following on 6/17/2008 10:33 AM:
>>>>>>>
>>>>>>> Actually I format my flash before re-imaging the software. so there
>>>>>>> is
>>>>>>>
>>>>>>>
>>>>>> no
>>>>>
>>>>>
>>>>>> config files or any other files in Flash except the image
>>>>>>>>
>>>>>>>>
>>>>>>>> 2008/6/17 Steve <threeseashells@googlemail.com>:
>>>>>>>>
>>>>>>>>
>>>>>>>> Have you tried dropping to ROMMON and manually deleting any startup
>>>>>>>>
>>>>>>>>
>>>>>>>>> config
>>>>>>>>> text files? From your output it seems to be powering up ok and
>>>>>>>>>
>>>>>>>>>
>>>>>>>> failing
>>>>>
>>>>>
>>>>>> on
>>>>>>>>> the config. Changing the image won't help as that's loading ok.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2008/6/16 Muhammad Nasim <muhammad.nasim@gmail.com>:
>>>>>>>>>
>>>>>>>>> I re-imaged the switch but still no luck
>>>>>>>>>
>>>>>>>>> any more ideas
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> 2008/6/16 Tyson Scott <tscott@ipexpert.com>:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> You could still try to do a password recovery to see if it can
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> recover. Where you are is the last step befor the nvram is
>>>>>>>>>>> loaded
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> so
>>>>>
>>>>>
>>>>>> it is worth testing.
>>>>>>>>>>>
>>>>>>>>>>> On Sun, Jun 15, 2008 at 11:13 AM, Muhammad Nasim
>>>>>>>>>>> <muhammad.nasim@gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>> It was a power shut down in the building and then after few
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> mintues
>>>>>
>>>>>
>>>>>> power
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> was up before that the switch was working fine.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Right now there is no configuration on the switch so
>>>>>>>>>>>> confgiuration
>>>>>>>>>>>> can
>>>>>>>>>>>>
>>>>>>>>>>>> not
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> be a issue
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2008/6/15 L Pham <ccie17030@gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> What happen BEFORE the restart ?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, Jun 15, 2008 at 7:58 AM, Muhammad Nasim
>>>>>>>>>>>>> <muhammad.nasim@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Dear All,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have switch 3560 with 48 ports with POE. It was working fine
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> but
>>>>>
>>>>>
>>>>>> now
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> after
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> a restart it is hang and below is the output where it hangs.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> Does
>>>>>
>>>>>
>>>>>> this
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> happens to anyone. I already changed the image even formated
>>>>>>>>>> the
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> flash
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> and
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> copy new image and boot but no luck still hanging on the same
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> output.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> Below is the output.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Initializing flashfs...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> flashfs[1]: 1 files, 1 directories
>>>>>>>>>>>>>> flashfs[1]: 0 orphaned files, 0 orphaned directories
>>>>>>>>>>>>>> flashfs[1]: Total bytes: 15998976
>>>>>>>>>>>>>> flashfs[1]: Bytes used: 6434304
>>>>>>>>>>>>>> flashfs[1]: Bytes available: 9564672
>>>>>>>>>>>>>> flashfs[1]: flashfs fsck took 1 seconds.
>>>>>>>>>>>>>> flashfs[1]: Initialization complete....done Initializing
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> flashfs.
>>>>>
>>>>>
>>>>>> POST: CPU MIC register Tests : Begin
>>>>>>>>>>>>>> POST: CPU MIC register Tests : End, Status Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> POST: PortASIC Memory Tests : Begin
>>>>>>>>>>>>>> POST: PortASIC Memory Tests : End, Status Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> POST: CPU MIC PortASIC interface Loopback Tests : Begin
>>>>>>>>>>>>>> POST: CPU MIC PortASIC interface Loopback Tests : End, Status
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> POST: PortASIC RingLoopback Tests : Begin
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> POST: PortASIC RingLoopback Tests : End, Status Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> POST: Inline Power Controller Tests : Begin
>>>>>>>>>>>>>> POST: Inline Power Controller Tests : End, Status Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> POST: PortASIC CAM Subsystem Tests : Begin
>>>>>>>>>>>>>> POST: PortASIC CAM Subsystem Tests : End, Status Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> POST: PortASIC Port Loopback Tests : Begin
>>>>>>>>>>>>>> POST: PortASIC Port Loopback Tests : End, Status Passed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Waiting for Port download...Complete
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> cisco WS-C3560-48PS (PowerPC405) processor (revision N0) with
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 118784K/12280K
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> byt
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> es of memory.
>>>>>>>>>>>>>> Processor board ID FDO1132Z6AS
>>>>>>>>>>>>>> Last reset from power-on
>>>>>>>>>>>>>> 1 Virtual Ethernet interface
>>>>>>>>>>>>>> 48 FastEthernet interfaces
>>>>>>>>>>>>>> 4 Gigabit Ethernet interfaces
>>>>>>>>>>>>>> The password-recovery mechanism is enabled.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 512K bytes of flash-simulated non-volatile configuration
>>>>>>>>>>>>>> memory.
>>>>>>>>>>>>>> Base ethernet MAC Address : 00:1D:45:69:CD:80
>>>>>>>>>>>>>> Motherboard assembly number : 73-9676-12
>>>>>>>>>>>>>> Power supply part number : 341-0029-05
>>>>>>>>>>>>>> Motherboard serial number : FDO113202PW
>>>>>>>>>>>>>> Power supply serial number : LIT11300B61
>>>>>>>>>>>>>> Model revision number : N0
>>>>>>>>>>>>>> Motherboard revision number : B0
>>>>>>>>>>>>>> Model number : WS-C3560-48PS-S
>>>>>>>>>>>>>> System serial number : FDO1132Z6AS
>>>>>>>>>>>>>> SFP Module assembly part number : 73-7757-03
>>>>>>>>>>>>>> SFP Module revision Number : A0
>>>>>>>>>>>>>> SFP Module serial number : FDO11310AM7
>>>>>>>>>>>>>> Top Assembly Part Number : 800-25859-03
>>>>>>>>>>>>>> Top Assembly Revision Number : J0
>>>>>>>>>>>>>> Version ID : V04
>>>>>>>>>>>>>> CLEI Code Number : CNMV3N0CRC
>>>>>>>>>>>>>> Hardware Board Revision Number : 0x01
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Switch Ports Model SW Version SW
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> Image
>>>>>
>>>>>
>>>>>> ------ ----- ----- ----------
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ----------
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> * 1 52 WS-C3560-48PS 12.2(25)SEE4
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> C3560-IPBASE-M
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> It hangs here and after that not going any further.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Any help and inputs required.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Muhammad Nasim
>>>>>>>>>>>>>> Network Engineer
>>>>>>>>>>>>>> Saudi Arabia
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>> _______________________________________________________________________
>>>>>
>>>>>
>>>>>> Subscription information may be found at:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>> Muhammad Nasim
>>>>>>>>>>>> Network Engineer
>>>>>>>>>>>> Saudi Arabia
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Tyson Scott - CCIE #13513 R&S and Security
>>>>>>>>>>> Technical Instructor - IPexpert, Inc.
>>>>>>>>>>>
>>>>>>>>>>> Telephone: +1.810.326.1444
>>>>>>>>>>> Fax: +1.810.454.0130
>>>>>>>>>>> Mailto: tscott@ipexpert.com
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Muhammad Nasim
>>>>>>>>>> Network Engineer
>>>>>>>>>> Saudi Arabia
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> --
>>>>>>>> Muhammad Nasim
>>>>>>>> Network Engineer
>>>>>>>> Saudi Arabia
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>> _______________________________________________________________________
>>>>>
>>>>>
>>>>>> Subscription information may be found at:
>>>>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> This e-mail is confidential and may contain legally privileged
>>>>>>> information. It is intended only for the addressees. If you have
>>>>>>>
>>>>>>>
>>>>>> received
>>>>>
>>>>>
>>>>>> this e-mail in error, kindly notify us immediately by telephone or
>>>>>>>
>>>>>>>
>>>>>> e-mail
>>>>>
>>>>>
>>>>>> and delete the message from your system.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> Muhammad Nasim
>>>>>> Network Engineer
>>>>>> Saudi Arabia
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Muhammad Nasim
>>>>> Network Engineer
>>>>> Saudi Arabia
>>>>>
>>>>>
>>>>> _______________________________________________________________________
>>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>> --
>>> Muhammad Nasim
>>> Network Engineer
>>> Saudi Arabia
>>>
>>>
>>>
>>>
>>
>>
>>
>> --
>> Tyson Scott - CCIE #13513 R&S and Security
>> Technical Instructor - IPexpert, Inc.
>>
>> Telephone: +1.810.326.1444
>> Fax: +1.810.454.0130
>> Mailto: tscott@ipexpert.com
>>
>> Join our free online support and peer group communities:
>> http://www.IPexpert.com/communities <http://www.ipexpert.com/communities>
>>
>> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
>> Demand and Audio Certification Training Tools for the Cisco CCIE R&S
>> Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
>> CCIE Storage Lab Certifications.
>>
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART