From: Muhammad Nasim (muhammad.nasim@gmail.com)
Date: Tue Jun 17 2008 - 05:33:13 ART
Actually I format my flash before re-imaging the software. so there is no
config files or any other files in Flash except the image
2008/6/17 Steve <threeseashells@googlemail.com>:
>
> Have you tried dropping to ROMMON and manually deleting any startup config
> text files? From your output it seems to be powering up ok and failing on
> the config. Changing the image won't help as that's loading ok.
>
>
>
> 2008/6/16 Muhammad Nasim <muhammad.nasim@gmail.com>:
>
> I re-imaged the switch but still no luck
>>
>> any more ideas
>>
>>
>> 2008/6/16 Tyson Scott <tscott@ipexpert.com>:
>>
>> > You could still try to do a password recovery to see if it can
>> > recover. Where you are is the last step befor the nvram is loaded so
>> > it is worth testing.
>> >
>> > On Sun, Jun 15, 2008 at 11:13 AM, Muhammad Nasim
>> > <muhammad.nasim@gmail.com> wrote:
>> > > It was a power shut down in the building and then after few mintues
>> power
>> > > was up before that the switch was working fine.
>> > >
>> > > Right now there is no configuration on the switch so confgiuration can
>> > not
>> > > be a issue
>> > >
>> > >
>> > >
>> > > 2008/6/15 L Pham <ccie17030@gmail.com>:
>> > >
>> > >> What happen BEFORE the restart ?
>> > >>
>> > >> On Sun, Jun 15, 2008 at 7:58 AM, Muhammad Nasim
>> > >> <muhammad.nasim@gmail.com> wrote:
>> > >> > Dear All,
>> > >> >
>> > >> > I have switch 3560 with 48 ports with POE. It was working fine but
>> now
>> > >> after
>> > >> > a restart it is hang and below is the output where it hangs. Does
>> this
>> > >> > happens to anyone. I already changed the image even formated the
>> flash
>> > >> and
>> > >> > copy new image and boot but no luck still hanging on the same
>> output.
>> > >> >
>> > >> > Below is the output.
>> > >> >
>> > >> > Initializing flashfs...
>> > >> >
>> > >> > flashfs[1]: 1 files, 1 directories
>> > >> > flashfs[1]: 0 orphaned files, 0 orphaned directories
>> > >> > flashfs[1]: Total bytes: 15998976
>> > >> > flashfs[1]: Bytes used: 6434304
>> > >> > flashfs[1]: Bytes available: 9564672
>> > >> > flashfs[1]: flashfs fsck took 1 seconds.
>> > >> > flashfs[1]: Initialization complete....done Initializing flashfs.
>> > >> >
>> > >> > POST: CPU MIC register Tests : Begin
>> > >> > POST: CPU MIC register Tests : End, Status Passed
>> > >> >
>> > >> > POST: PortASIC Memory Tests : Begin
>> > >> > POST: PortASIC Memory Tests : End, Status Passed
>> > >> >
>> > >> > POST: CPU MIC PortASIC interface Loopback Tests : Begin
>> > >> > POST: CPU MIC PortASIC interface Loopback Tests : End, Status
>> Passed
>> > >> >
>> > >> > POST: PortASIC RingLoopback Tests : Begin
>> > >> > POST: PortASIC RingLoopback Tests : End, Status Passed
>> > >> >
>> > >> > POST: Inline Power Controller Tests : Begin
>> > >> > POST: Inline Power Controller Tests : End, Status Passed
>> > >> >
>> > >> > POST: PortASIC CAM Subsystem Tests : Begin
>> > >> > POST: PortASIC CAM Subsystem Tests : End, Status Passed
>> > >> >
>> > >> > POST: PortASIC Port Loopback Tests : Begin
>> > >> > POST: PortASIC Port Loopback Tests : End, Status Passed
>> > >> >
>> > >> > Waiting for Port download...Complete
>> > >> >
>> > >> > cisco WS-C3560-48PS (PowerPC405) processor (revision N0) with
>> > >> 118784K/12280K
>> > >> > byt
>> > >> > es of memory.
>> > >> > Processor board ID FDO1132Z6AS
>> > >> > Last reset from power-on
>> > >> > 1 Virtual Ethernet interface
>> > >> > 48 FastEthernet interfaces
>> > >> > 4 Gigabit Ethernet interfaces
>> > >> > The password-recovery mechanism is enabled.
>> > >> >
>> > >> > 512K bytes of flash-simulated non-volatile configuration memory.
>> > >> > Base ethernet MAC Address : 00:1D:45:69:CD:80
>> > >> > Motherboard assembly number : 73-9676-12
>> > >> > Power supply part number : 341-0029-05
>> > >> > Motherboard serial number : FDO113202PW
>> > >> > Power supply serial number : LIT11300B61
>> > >> > Model revision number : N0
>> > >> > Motherboard revision number : B0
>> > >> > Model number : WS-C3560-48PS-S
>> > >> > System serial number : FDO1132Z6AS
>> > >> > SFP Module assembly part number : 73-7757-03
>> > >> > SFP Module revision Number : A0
>> > >> > SFP Module serial number : FDO11310AM7
>> > >> > Top Assembly Part Number : 800-25859-03
>> > >> > Top Assembly Revision Number : J0
>> > >> > Version ID : V04
>> > >> > CLEI Code Number : CNMV3N0CRC
>> > >> > Hardware Board Revision Number : 0x01
>> > >> >
>> > >> >
>> > >> > Switch Ports Model SW Version SW Image
>> > >> > ------ ----- ----- ----------
>> ----------
>> > >> > * 1 52 WS-C3560-48PS 12.2(25)SEE4
>> > C3560-IPBASE-M
>> > >> >
>> > >> >
>> > >> > It hangs here and after that not going any further.
>> > >> >
>> > >> > Any help and inputs required.
>> > >> >
>> > >> > --
>> > >> > Muhammad Nasim
>> > >> > Network Engineer
>> > >> > Saudi Arabia
>> > >> >
>> > >> >
>> > >> >
>> > _______________________________________________________________________
>> > >> > Subscription information may be found at:
>> > >> > http://www.groupstudy.com/list/CCIELab.html
>> > >> >
>> > >> >
>> > >> >
>> > >> >
>> > >> >
>> > >>
>> > >
>> > >
>> > >
>> > > --
>> > > Muhammad Nasim
>> > > Network Engineer
>> > > Saudi Arabia
>> > >
>> > >
>> >
>> >
>> >
>> > --
>> > Tyson Scott - CCIE #13513 R&S and Security
>> > Technical Instructor - IPexpert, Inc.
>> >
>> > Telephone: +1.810.326.1444
>> > Fax: +1.810.454.0130
>> > Mailto: tscott@ipexpert.com
>> >
>>
>>
>>
>> --
>> Muhammad Nasim
>> Network Engineer
>> Saudi Arabia
>>
>>
>
-- Muhammad Nasim Network Engineer Saudi Arabia
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:22 ART