From: keith tokash (ktokash@hotmail.com)
Date: Mon Jun 16 2008 - 18:29:24 ART
Try 6.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12
.2_44_se/command/reference/cli3.html#wpmkr1946283
"The forwarding time specifies how long each of the listening and learning
states last before the interface begins forwarding."
Note the word "each". That's not just for MST, MST just happened to be faster
to pull up.
The information in this e-mail is intended for the
attention and use of the everyone in the world, or I wouldn't have sent it in
an unencrypted email. This message or any part thereof can and should be
disclosed, copied, distributed and retained by any person without
authorization from the addressee. Furthermore, I reserve the right to
disclose, copy, distribute and retain anything anyone sends *me* via email, up
to and including putting the exact text in a MySpace bulletin.
> Date: Mon, 16 Jun 2008 16:59:30 -0400
> To: ccielab@groupstudy.com
> From: ccieking@gmail.com
> Subject: Spanning-tree forward-time
>
> Hi experts
> Can anyone corret my answer for this question?
>
> Configure VLAN 10 on SW4 that the total link startup delay (till the port
> becomes forwarding ) is 12 seconds.
>
> spanning-tree vlan 10 forward-time 12
>
> Is it correct?
>
> Regards
> Richard
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART