From: L Pham (ccie17030@gmail.com)
Date: Sun Jun 15 2008 - 12:06:07 ART
What happen BEFORE the restart ?
On Sun, Jun 15, 2008 at 7:58 AM, Muhammad Nasim
<muhammad.nasim@gmail.com> wrote:
> Dear All,
>
> I have switch 3560 with 48 ports with POE. It was working fine but now after
> a restart it is hang and below is the output where it hangs. Does this
> happens to anyone. I already changed the image even formated the flash and
> copy new image and boot but no luck still hanging on the same output.
>
> Below is the output.
>
> Initializing flashfs...
>
> flashfs[1]: 1 files, 1 directories
> flashfs[1]: 0 orphaned files, 0 orphaned directories
> flashfs[1]: Total bytes: 15998976
> flashfs[1]: Bytes used: 6434304
> flashfs[1]: Bytes available: 9564672
> flashfs[1]: flashfs fsck took 1 seconds.
> flashfs[1]: Initialization complete....done Initializing flashfs.
>
> POST: CPU MIC register Tests : Begin
> POST: CPU MIC register Tests : End, Status Passed
>
> POST: PortASIC Memory Tests : Begin
> POST: PortASIC Memory Tests : End, Status Passed
>
> POST: CPU MIC PortASIC interface Loopback Tests : Begin
> POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed
>
> POST: PortASIC RingLoopback Tests : Begin
> POST: PortASIC RingLoopback Tests : End, Status Passed
>
> POST: Inline Power Controller Tests : Begin
> POST: Inline Power Controller Tests : End, Status Passed
>
> POST: PortASIC CAM Subsystem Tests : Begin
> POST: PortASIC CAM Subsystem Tests : End, Status Passed
>
> POST: PortASIC Port Loopback Tests : Begin
> POST: PortASIC Port Loopback Tests : End, Status Passed
>
> Waiting for Port download...Complete
>
> cisco WS-C3560-48PS (PowerPC405) processor (revision N0) with 118784K/12280K
> byt
> es of memory.
> Processor board ID FDO1132Z6AS
> Last reset from power-on
> 1 Virtual Ethernet interface
> 48 FastEthernet interfaces
> 4 Gigabit Ethernet interfaces
> The password-recovery mechanism is enabled.
>
> 512K bytes of flash-simulated non-volatile configuration memory.
> Base ethernet MAC Address : 00:1D:45:69:CD:80
> Motherboard assembly number : 73-9676-12
> Power supply part number : 341-0029-05
> Motherboard serial number : FDO113202PW
> Power supply serial number : LIT11300B61
> Model revision number : N0
> Motherboard revision number : B0
> Model number : WS-C3560-48PS-S
> System serial number : FDO1132Z6AS
> SFP Module assembly part number : 73-7757-03
> SFP Module revision Number : A0
> SFP Module serial number : FDO11310AM7
> Top Assembly Part Number : 800-25859-03
> Top Assembly Revision Number : J0
> Version ID : V04
> CLEI Code Number : CNMV3N0CRC
> Hardware Board Revision Number : 0x01
>
>
> Switch Ports Model SW Version SW Image
> ------ ----- ----- ---------- ----------
> * 1 52 WS-C3560-48PS 12.2(25)SEE4 C3560-IPBASE-M
>
>
> It hangs here and after that not going any further.
>
> Any help and inputs required.
>
> --
> Muhammad Nasim
> Network Engineer
> Saudi Arabia
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART