RE: cisco router management

From: Nico van Niekerk (nico.vanniekerk@gmail.com)
Date: Wed Jun 11 2008 - 18:06:05 ART

• Next message: 2008ccie@live.com: "Redistribution"
• Previous message: Sadiq Yakasai: "Re: Eigrp indirect injection of lo0"
• Maybe in reply to: David Lonnie: "cisco router management"
• Next in thread: Carlson guo: "Re: cisco router management"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

"But user1 can telnet into R2,even if user2 has telneted into R1."

I assume you're talking about R1 not R2?

Why not give user 1 another password without username and do the following:

username user1 password x
username user2 password y

line vty 0
login local

line vty 1 4
login
password (some password only user1 has)

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
David Lonnie
Sent: 11 June 2008 05:24 PM
To: ccielab@groupstudy.com
Subject: cisco router management

Hi,experts:

There are 2 users on R1, for example user1 and user2.
My question is how to configure on R1 so,
Once an inbound telnet session using the user1 credentials has been
established,no other telnet sessions are allowed to occur.
But user1 can telnet into R2,even if user2 has telneted into R1.

Is there a solution?

thanks in advance.

David.

• Next message: 2008ccie@live.com: "Redistribution"
• Previous message: Sadiq Yakasai: "Re: Eigrp indirect injection of lo0"
• Maybe in reply to: David Lonnie: "cisco router management"
• Next in thread: Carlson guo: "Re: cisco router management"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART