BGP RIB Failure

From: Ravi Krishna (ravikrishnalv@gmail.com)
Date: Wed Jun 11 2008 - 05:21:54 ART

• Next message: Sadiq Yakasai: "Re: BGP RIB Failure"
• Previous message: seyfert .: "Re: Lab do and dont's..VTY access"
• Next in thread: Sadiq Yakasai: "Re: BGP RIB Failure"
• Maybe reply: Sadiq Yakasai: "Re: BGP RIB Failure"
• Maybe reply: one atatime: "Re: BGP RIB Failure"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

The following is the secnario i'm trying to simulate in dynamips.

 R5 (AS200) R4(AS300)
       | |
       | |
 R1(AS100) ----------------------------- R3(AS100)
           \ /
             \ /
                \ /
                   R2(AS100)

AS100 -

OSPF is running between R1,R2.R3 and IBGP peering between R1and R3. EBGP
peering between R1-R5 and R3-R4.

BGP is been redistributed in to OSPF at R1 and R3 in AS100.

I'm getting an error in R1 if i check for the networks connected in AS300 as
RIB Failure. The same is happening with R3 if i check for the networks
connected to R5.

Appreciate your help in resolving this problem.

Regards,
Ravi

• Next message: Sadiq Yakasai: "Re: BGP RIB Failure"
• Previous message: seyfert .: "Re: Lab do and dont's..VTY access"
• Next in thread: Sadiq Yakasai: "Re: BGP RIB Failure"
• Maybe reply: Sadiq Yakasai: "Re: BGP RIB Failure"
• Maybe reply: one atatime: "Re: BGP RIB Failure"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART