From: Rich Collins (nilsi2002@gmail.com)
Date: Tue Jun 10 2008 - 14:41:35 ART
I haven't tried too much yet but have been able to run basic static xconnect
for ethernet L2tpv3.
PE1#sh l2tun session
%No active L2F tunnels
L2TP Session Information Total tunnels 1 sessions 1
LocID RemID TunID Username, Intf/ State Last Chg Uniq
ID
Vcid, Circuit
12305 47183 20103 1, Et0/3 est 00:05:27 1
%No active PPTP tunnels
PE1#sh l2tun tunnel
%No active L2F tunnels
L2TP Tunnel Information Total tunnels 1 sessions 1
LocID RemID Remote Name State Remote Address Port Sessions L2TP Class/
VPDN Group
20103 14523 PE2 est 10.1.1.2 0 1
l2tp_default_cl
%No active PPTP tunnels
PE1#
-Rich
On Tue, Jun 10, 2008 at 5:08 AM, backbone systems <
backbone.systems@gmail.com> wrote:
> Hi,
>
> I was tryng to practice above technolgy over dynamips but it seems it
> is not supported?
>
> Secondly for ATM PA-!A hardware AAL5 over MPLS is not supported?
>
> Can someone let me know secifically which features of SP i can not
> practice on Dyamips.
> I would like to make a list of those technogies for rack rentals.
>
> U can unicast me if it is off topic.
>
> rgards
>
> backbone
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART