RE: Etherchannel mode ON

From: keith tokash (ktokash@hotmail.com)
Date: Tue Jun 10 2008 - 12:34:14 ART


Yes sir. The tricky part comes when they tell you "don't use any proprietary
protocols" and you use LACP but leave DTP on. Good way to do 99% of the work
for 0% of the points.

The information in this e-mail is intended for the
attention and use of the everyone in the world, or I wouldn't have sent it in
an unencrypted email. This message or any part thereof can and should be
disclosed, copied, distributed and retained by any person without
authorization from the addressee. Furthermore, I reserve the right to
disclose, copy, distribute and retain anything anyone sends *me* via email, up
to and including putting the exact text in a MySpace bulletin.

> From: chris.gray@ozonenetworks.net
> To: ccielab@groupstudy.com
> Subject: RE: Etherchannel mode ON
> Date: Tue, 10 Jun 2008 10:37:22 +0100
>
> So I guess when the question tells us to use an IEEE protocol that provides
> link aggregation etc etc , we should use 'lacp' not 'ON' for our
> etherchannel config.
>
> Thanks for the clarification..
>
> Chris
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Sadiq Yakasai
> Sent: 10 June 2008 10:27
> To: Chris Gray
> Cc: ccielab@groupstudy.com
> Subject: Re: Etherchannel mode ON
>
> Hi Chris,
>
> Is actually neither :)
>
> The actual negotiation of the etherchannel is not performed in this mode
and
> the member ports are just forced into the group. More here:
>
>
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/1
> 2.2_44_se/configuration/guide/swethchl.html#wp1275535
>
> HTH
> Sadiq
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>



This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART