From: Chris Gray (chris.gray@ozonenetworks.net)
Date: Mon Jun 09 2008 - 15:48:34 ART
I have this working no problem. From memory I think I used a regular blue
cisco console cable into the VPN 3000 concentrator.If it wasn't this, All I
would have done was to cut the rj45 end off and recrimp the other way round
(roll over).
Sorry not to be precise, but I set it up over a year ago now. There were no
specific pin outs needed.
Regs
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jason W. Miller
Sent: 09 June 2008 19:11
To: Sadiq Yakasai
Cc: Cisco certification; Cisco certification
Subject: Re: Console into a VPN Concentrator
You might find these links very useful.
http://www.instructables.com/id/Cisco-Console-to-Null-Modem-Serial-Adapter/
http://www.conserver.com/consoles/Cisco/cisco-hosts.html
On 6/9/08, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
>
> Hi Guys,
>
> So I am trying to get my terminal server to reverse telnet to a VPN
> concentrator but to no avail. I have even tried directly connecting a PC
> into it but no way! The emulation program just hangs! I have tried with
> another box and the same problem is seen.
>
> So I read somewhere on CCO that it need a NullModem cable? Which I havent
> got so i tried to use a crossover cable and a straight through cable,
> connecting at the ends to an RS-232 adapters but to no avail.
>
> Please whats the secret to setting this up?
>
> Thanks
>
> Sadiq
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART