From: John (jgarrison1@austin.rr.com)
Date: Sat Jun 07 2008 - 17:03:24 ART
I think this does it
access-list 1 permit x.x.x.x
router rip
distribute-list 1 in
route-map ripospf permit 10
match ip add 1
router eigrp x
red rip route-map ripospf out met 1 1 1 1 1500
----- Original Message -----
From: "Matt Bentley" <mattdbentley@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, June 07, 2008 1:09 PM
Subject: Tough Filtering Question
> Hi GS:
>
> Ran across this one on a lab.
>
> Requirement #1: R1 is receiving 10 RIP routes from BB1, you want to filter
> out all except 1. You must use a standard ACL
> Requirement #2: You want to redistribute only that one route received from
> BB1 from RIP into EIGRP on R1, restricting the redistribution to only that
> single route. The ACL you use to restrict must be the same as the one
> used
> to filter from BB1.
>
> Using distance, offset-lists, and distribute-lists, you have to DENY that
> single RIP route to prevent it getting filtered. Correct? How can you
> use
> that same ACL to PERMIT it to be redistributed into EIGRP.
>
> Thanks in advance.
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART