From: Curt Gregg (cugregg) (cugregg@cisco.com)
Date: Fri Jun 06 2008 - 13:50:46 ART
I would also check to see if you need to upgrade the maintenance
partition. Jumping from 2.3 to 3.1 required a maintenance partition
upgrade. Check the release notes.
But yeah 4.0.1 should be the latest.
Curt
CCIE 18444
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Anh Khoa Le Viet
Sent: Friday, June 06, 2008 12:19 PM
To: kang lee
Cc: ccielab@groupstudy.com
Subject: Re: FWSM Software
Hi,
As I know that the latest software for FWSM is 4.0(1) which was released
on 13-MAY-2008 ( you can check in
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm)
I've tried with a 7609 box and everything is OK.
Try these below web pages for upgrading FWSM:
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note
09186a0080531753.shtml
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmr
n40.html#wp161551
http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/configuration/guide
/swcnfg_f.html#wp1057450
Hope it help.
Regards,
Khoa Le
On Fri, Jun 6, 2008 at 9:55 AM, kang lee <kanghlee@gmail.com> wrote:
> GS,
>
> Does anyone knows what is the latest OS for FWSM for Catalyst 6500
> serious and have any issues to upgrade from 3.1? I have failover unit
> on the same chassis.
>
> Any comment or tip might be helpful.
>
> thanks
>
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART